Nope...just the top plenum needs to come off. Lucky YOU!
If you're REALLY lucky, you will be able to spread the "tubes"(runners) out enough to get it out and back in
fairly easily. Sometimes, tho, you have to loosen at least one side...but getting to two of the bolts is a pita, as they come in from the INSIDE...you need a really long #40 torx bit to get them.
Take pics, and take your time, and all should be ok.
Spray the two nuts/bolts down that hold the egr valve on before ya start, to give it time to soak...you sure don't want to hear one of those bad boys go "snap!"
You really shouldn't have any problems, tho. Just be sure you get the correct EGR valve, and plenum gaskets.
(dang spelchek...)Adams' Apple2007-08-27 21:16:23______________
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"