what will i need to measure before i drop it in?  also, how heavy is this hood going to be?  my sister and i will be doing the work.  i would hate to drop it on one of our head's before we get on the car.

thanks a lot.  that would be great

All C3s from 73 on use the same basic hood shape, so there is nothing to measure in advance.  What everyone is saying is that the manufacturing quality varies greatly. 
Any two adults can set one in place.  They are not heavy.  Once you bolt it to the hinges, VERY slowly close it and look for interference.  Stop before it touches and adjust the hinges until it fits as well as it can, then decide where you need to add or remove material to make it look right.  Since our cars are old, sometimes you just can't get it right without bodywork on the car itself.  If you are planning a paint job, that is no problem. 

I have had hoods where I sawed through the reinforcement in the back and re-arched the whole hood.  I have also added fiberglass to the hood surround to match the hood.  They can all be made to fit.

Good Luck
Larry

thank you larry very much.  i am also going to have to get the nose painted. my sister ran into it.  it didn't break anything, just scuffed it.  i don't know whether to buy a new nose or just get it fixed.

Glad you reposted forgot to send you the link...... ebo2010-03-26 14:58:46

______________

Click on image for larger view!
LIFETIME MEMBER 151

thank you ebo  for that info.  i will go and pull it up.  this should be an interesting project for my sister and i. 

 

 

 

karen

larry, do you have hoods at your store? 

[QUOTE=white heat]

thank you ebo  for that info.  i will go and pull it up.  this should be an interesting project for my sister and i. 

 

 

 

karen

[/QUOTE]

______________

Click on image for larger view!
LIFETIME MEMBER 151

i am not sure how efficient we will look, but it should be highly entertaining.

We carry a few used hoods, but they are all stock height.  We are dealers for all the major manufacturers, so can get about anything.  We for sure can save some money for those who live near us, but might not be able to for those who live across country.

As far as the front bumper, we highly recommend the Tru-Flex replacement.  It is more rigid than the original urethane, but still flexes enough to not crack.  It is also less expensive.

Larry

I have a beautiful factory hood off my 79. You can have it if you can figure our how to ship it!!