The studs your talking about I think I saw those when I had both moldings off getting the old adhesive removed. But only see two on either side and out towards the ends!
I got the clips in the corvette catalog not to mention the name but will contact them but clips and screws included. The strip clips in either end but the middle part where no clips I will have to do something as it wants to move up and away from the chrome piece and the windshield?
As I said it looked like the black 3M glue was used before. I really don't want to try and drill holes in the front and with the glass there?
So I will wait for some replys and look at it again but it looks like some 3M across the middle but will have to have some pressure on it until it drys or it will bow out!
BB78
I know you don't want mixed posts but now with all the door opening I think the battery is shot!
I get the clicking noise and maybe a half crank but that is it. I had a battery tender on but last time I had to jump it. It started but took a while. I let her run but could not get her out on the road for a good run so I guess it really did not charge. But now even with a jump it will not crank over?????
I know I was fulling with fuses on the fuse box but checked the wires. I know in the past I had to reconnect the I believe IGN wire that's in the center of the box..I'm wondering if it is not the battery and I moved something. Battery show 10 _10.5 I would think that would crank. but the amp meter when cranking or prior only shows around 8.
Ok I guess no fathers day ride this year...
Thanks BB78
______________