Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Exhaust Bezel

in Forum: C3 Body


Already a Member?
Login
Not yet a Member?
Register for Free!

Exhaust Bezel (1/4)
 5/23/10 7:58pm
ossw1
Former Member

Send Private Message

Rocklin, CA - USA

Vette(s):
1970 T-Top350/350hp numbers matching 4 speed. It's a mess and 1970 Convertible 4 speed.


Joined: 4/2/2005
Posts: 484

Hey from the pics from my 70 conv it does not have the square opening for the exhaust on the lower bezal. Is this normal?
Our Sponsors help support C3VR
Exhaust Bezel (2/4)
 5/23/10 8:43pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20126

No. It should have the openings. Someone prolly closed them up to install side exhaust...a common modification.

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Exhaust Bezel (3/4)
 5/23/10 9:07pm
ossw1
Former Member

Send Private Message

Rocklin, CA - USA

Vette(s):
1970 T-Top350/350hp numbers matching 4 speed. It's a mess and 1970 Convertible 4 speed.


Joined: 4/2/2005
Posts: 484

Joel, I was thinking the same thang. When it gets here I will see what will it take to get it back stock.

Exhaust Bezel (4/4)
 5/24/10 1:30pm
VetteSpecialties
Former Member

Send Private Message

Mounds View, MN - USA

Vette(s):
70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe


Joined: 5/24/2007
Posts: 1031

There is a replacement rear bezel that fills the whole opening.  Maybe you will be lucky and have that bezel.  If so, you can order the correct bezel and flanges, or just order the flanges and cut your bezel to fit.  We have a used repro bezel for $40.00.  Worst case is that someone has glassed over all oit, and you have to cut new openings and buy or make four flanges.

Larry
Our Sponsors help support C3VR