Hey Dave,
I replaced the 81's header in 2007. It actually fell off.
Bought new from Eckler's for $75.99, Part # 26210
I sanded the underbody where the old header was originally bonded.
It wasn't too much work using course sandpaper especially on the big globs.
I gently sanded the flanges on the header.
Did some research and bought Lord - Fusor Adhesion Prep cleaner. $15.71,
Fusor 127/T24 EZ Plastic structural installation adhesive, slow set $45.18.
Also bought the Lord - Fusor special dispensor gun $41.95 for the Lord- Fusor adhesive.
PM me if you want to borrow. Cheap rates apply!
|UPDATED|8/4/2014 6:51:07 PM (AZT)|/UPDATED|
______________