Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: How to remove windshield washer bottle

in Forum: C3 Body


Already a Member?
Login
Not yet a Member?
Register for Free!

How to remove windshield washer bottle (1/3)
 6/1/17 12:40pm
BillHanna
Standard Member
Send Private Message

Cana, VA - USA

Vette(s):
1975 Stingray 71 350 engine Flat top pistons Sniper fuel injection Hyperspark ignition Vintage Air air conditioning Borgeson power steering box


Joined: 7/3/2016
Posts: 319

Now that I've fixed almost everything in my 75 coupe, it's down to the little stuff.

The windshield washer pump does not work, but I don't see how to remove the bottle without removing the brake booster or ??

Any ideas on the best way to get to the washer pump?



______________

   

Our Sponsors help support C3VR
Re: How to remove windshield washer bottle (2/3)
 6/4/17 2:31pm
VetteCountryLifetime Member
Lifetime Member
Send Private Message

Belvidere, IL - USA

Vette(s):
1977 Black T-Top ZZ4 5Sp 16in Wheels


Joined: 10/24/2004
Posts: 436

You can come up from the bottom. Remove the rocker, 4 bolts hold splash guard on. Check it out.
Re: How to remove windshield washer bottle (3/3)
 6/4/17 3:23pm
Vman73
Former Member

Send Private Message

Gig Harbor, WA - USA

Vette(s):
1973 L82 4 Speed Coupe - Very original, well documented driver/survivor. 2016 Bend Regional NCRS Top Flight.


Joined: 10/2/2014
Posts: 405

Bill, +1 on up from the bottom. I thought it was two bolts that hold the lower shield but I could be wrong. Removed both of mine for cleaning etc. last year. I was actually able to loosen the front two screws of the rocker panel and carefully pry it back to get at the bolts. If you can, no need to completely remove the rocker, the middle three or four screws are usually rusted in and can turn into another can of worms. Good luck !!

______________
John Sigmund
valkman57@sbcglobal.net
NCRS Member 61302
NW NCRS Chapter Member



Duct tape is the new Black !!
Our Sponsors help support C3VR