I am posting pics of the ac/heater switch and the diagram and to me they do line up  even if I stand on my head they do not match the diagram so I don't know where the black vac input or heater door lines go. When I hook it up the best I can the heater core door will not open so vac  line on wrong port at control. could someone send me straight?

______________

Hi Mark,

I sent you a PM....


Keith


______________

Nobody ever waves when I'm driving the Explorer.
K Woody

Hopefully you got this solved but the 2 post that are on the outside of the five vacum post should help line up the vacum plug to the switch ?

|UPDATED|8/12/2012 9:14:33 AM (AZT)|/UPDATED|

I have the post lined up and can get it on the switch it's where do the hoses go on? 1-5 holes are not what I show on the diagram the holes are a different slant or on the right of previous hole and diagram says the hole is on the. Other side if they were marked 1-5 on the switch itself it would be easy. Still don't have the right sequence as not all doors are working per switch position and all doors and vac diaphragms are in working order so have the hoses on the wrong ports. Thanks I will keep at it until I get it. Holding up the dash install Bb78

______________

Hi Mark,

I just sent (email) you 3 pictures of my install. I hope it helps. 


Ketih


______________

Nobody ever waves when I'm driving the Explorer.
K Woody