If you can feel it blowing air towards the front, the fans are definitely running backwards. All you need to do to correct that is swap the wires for the fans. For instance, if you have a red wire on terminal "A", and a black wire on terminal "B", just swap them so the red is on B, and the black is on A. Then the fans will run in the other direction.
One caveat here...you may need to verify the shape/orientation of the fan blades. The make "pusher" fans for in front of the rad, and "puller" fans for behind the rad. The blades on these two types are different, and they normally will NOT work if the fan motor is running backwards from the design. Do you have a pic of the fan blades....that would help determine if it will work just swapping the wires.
|UPDATED|10/11/2012 10:01:10 AM (AZT)|/UPDATED|
______________
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"