Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: HYDROMATIC GUYS...what do I have, Thanks!!

in Forum: C3 Driveline Components


Already a Member?
Login
Not yet a Member?
Register for Free!

HYDROMATIC GUYS...what do I have, Thanks!! (1/8)
 6/21/08 9:07pm
engineguy63
Former Member

Send Private Message

Easthampton, MA - USA

Vette(s):
1970 corvette conv, 350 auto.


Joined: 5/27/2007
Posts: 114

Well Guy's...and Gal's, looks like my engine #'s match the VIN, but, The tranny is not the correct one. Runs great and seam's to shift nice and crisp, so , I realy cant complain...BUT....I realy what to know if it is even the correct type of transmission...and if the gearing would be diffrent than it is supposed to be. SO...looking to find out the following if possible, and I took some pictures that I hope will help.
1) is it in fact a THM400 like it is supposed to have, or something else
2) if it is...or is not a 400, is the gearing difrent and going to make issues for the drivetrain
3)the following #'s are on the tag...can anyone tell me what vehicle the tranny is from....and how it would be diffrent from the one that is supposed to be in there  75P480        75CP  40309   
 
    Thanks for your help...then I think I will stop searching out #'s and torchuring myself!!Confused
Our Sponsors help support C3VR
HYDROMATIC GUYS...what do I have, Thanks!! (2/8)
 6/21/08 9:11pm
engineguy63
Former Member

Send Private Message

Easthampton, MA - USA

Vette(s):
1970 corvette conv, 350 auto.


Joined: 5/27/2007
Posts: 114

TRANNY PIC


(modified large image to link)Adams' Apple2008-06-21 18:40:41
HYDROMATIC GUYS...what do I have, Thanks!! (3/8)
 6/21/08 9:12pm
engineguy63
Former Member

Send Private Message

Easthampton, MA - USA

Vette(s):
1970 corvette conv, 350 auto.


Joined: 5/27/2007
Posts: 114

Tranny




(modified large image to link)Adams' Apple2008-06-21 18:38:21
HYDROMATIC GUYS...what do I have, Thanks!! (4/8)
 6/21/08 9:21pm
kstyerLifetime Member
Lifetime Member
Moderator
Send Private Message

CUYAHOGA FALLS, OH - USA

Vette(s):
1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!


Joined: 12/2/2003
Posts: 6424

If you have a fairly square pan with a corner cut off, it's a THM350.  If it's a rectangle with notches in two corners, it's a THM400
 
The 400 uses a 2.5:1 first gear ratio
The 350 uses a 2.75:1 first gear
 
I don't have a book for the numbers.   Someone??
HYDROMATIC GUYS...what do I have, Thanks!! (5/8)
 6/21/08 9:23pm
kstyerLifetime Member
Lifetime Member
Moderator
Send Private Message

CUYAHOGA FALLS, OH - USA

Vette(s):
1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!


Joined: 12/2/2003
Posts: 6424

THM400
HYDROMATIC GUYS...what do I have, Thanks!! (6/8)
 6/21/08 9:44pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20128

I consolidated three threads into this one.
It is a 400 trans. Adams' Apple2008-06-21 18:44:31

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

HYDROMATIC GUYS...what do I have, Thanks!! (7/8)
 6/22/08 7:46am
engineguy63
Former Member

Send Private Message

Easthampton, MA - USA

Vette(s):
1970 corvette conv, 350 auto.


Joined: 5/27/2007
Posts: 114

Thanks KSTYER, and Joel...sorry I made it a couple posts..........GLAD AT LEAST IT IS A THM400......little bit of seapage around gasket so I am gonna change the gasket and filter. The parts where ordered as for a 1970...will they fit if tranny is a '75    Shocked
HYDROMATIC GUYS...what do I have, Thanks!! (8/8)
 6/22/08 11:58am
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20128

All 400s are the same...there are no differences in anything but the calibrations of the valve body, and a (very)few internal parts differences. As long as you order/request parts for a 400, they'll work just fine.

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Our Sponsors help support C3VR