My info says it could have either a 10 1/2"(10 3/8" outside diameter) or 11"(10 15/16" od) clutch, 10 spline. Info also shows both clutches use the SAME flywheel. The difference is going to be in the actual size of the clutch disc itself, AND the diameter of the actual plate on the pressure plate. So from this,
either clutch set-up will work, but the 11" would be the better choice, due to the extra friction available.
My '74 L-48 small block has an 11" clutch, but it is the BW ST-10, 26 spline disc.
hth
btw...if you have a Pep Boys in your area, you can get a LUK clutch set from them, and not have to order/wait. They may have to get one from their warehouse, but they will normally have one delivered that day. Around here, Pep Boys is usually a little cheaper than our normal supplier, to. Worth a shot.
|UPDATED|6/14/2013 7:39:05 AM (AZT)|/UPDATED|
______________
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"