Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Indicator/Headlight Dipper Switch on the Steering Column

in Forum: C3 Electrical


Already a Member?
Login
Not yet a Member?
Register for Free!

Indicator/Headlight Dipper Switch on the Steering Column (1/4)
 4/3/13 5:58am
Black V 77
Former Member

Send Private Message

Joined: 7/17/2010
Posts: 3

Hi

The plastic cover on steering column which houses the headlight dipper switchs and indicator stalk has perished over time and fallen apart? I have the replacement cover to replace. My problem is the plastic slide which fits inside has fallen out. This actuates the headlights from Hi to Lo beam, and I am not sure what position it should be in to re install? Any help would be great? I can send photos to further explain. 

Scott in Oz.
Our Sponsors help support C3VR
Re: Indicator/Headlight Dipper Switch on the Steering Column (2/4)
 4/3/13 1:13pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20128

I'm looking for visual aids.....hang in there....Wink


btw..if you post a pic of the plastic slide piece, I think I can describe how it fits in there. I do know it's a pita sometimes to get back into place, even tho they fall out rather easily.


|UPDATED|4/3/2013 10:13:48 AM (AZT)|/UPDATED|


______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: Indicator/Headlight Dipper Switch on the Steering Column (3/4)
 4/4/13 12:45pm
Black V 77
Former Member

Send Private Message

Joined: 7/17/2010
Posts: 3

Hi Joel,
I have tried to solve the puzzle?Here are a couple of photos of the slide, and how I think it goes into the cover? Scott
 
PIC 1

PIC 2

(large images modified to links-aapple)


|UPDATED|4/4/2013 9:45:56 AM (AZT)|/UPDATED|
Re: Indicator/Headlight Dipper Switch on the Steering Column (4/4)
 4/4/13 12:49pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20128

I believe you have it correctly situated. The curved end(where the part number is in the pic) fits up against the wire end of the switch linkage. The turn signal stalk has a stand-off/post on it that pushes on the other end of the white plastic part. Getting all of it back up in there can be frustrating, or it may just put itself back together. MOST of the ones I've done I've had to fight with at least a little before getting it all back together.

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Our Sponsors help support C3VR