Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Starter Wire Wrap

in Forum: C3 Electrical


Already a Member?
Login
Not yet a Member?
Register for Free!

Starter Wire Wrap (1/7)
 1/31/11 2:50am
daveo76
Former Member

Send Private Message

Vancouver, WA - USA

Vette(s):
1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.


Joined: 8/25/2005
Posts: 857

The smaller wires coming to my starter (red + a couple of blacks) were originally wrapped with a lighter colored cloth type of tape.  What is a good substitute for that?  Heat resistant electrical tape or is there something else?  As always, originality is not a concern for me - just want something that works.  

Thanks,
Dave


______________

 

1976 Silver/Firethorn.  L48, 4spd.  Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Our Sponsors help support C3VR
Starter Wire Wrap (2/7)
 1/31/11 7:14am
yostusota
Former Member

Send Private Message

York, PA - USA

Vette(s):
1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top


Joined: 5/18/2010
Posts: 1518

I keep a roll of friction tape in my box at work..you can get it at sports stores that sell stuff for hockey..its for wrapping the end of the stick with..its the black sticky cloth tape..you can buy it from a fancy electrical shop but I found its the same stuff..manufacturers still use it today as it works..sometimes people don't like to cover those wires up though because they are fusable links..at least a couple of them are..if one gets burned out it makes for hard finding if they are taped up tight..mine are just hanging aroud down there..
Rich

______________

My first parade at Carlisle 2010
Starter Wire Wrap (3/7)
 1/31/11 9:02am
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20129

Pretty much any good electrical tape will work. Rich has a point about wrapping the fuse-links...might wanna leave those out where you can get to them. Or...instead of wrapping the harness in tape, get ya some of that plastic "accordion" wire harness shielding. Then you can put a light tape wrap, and slide the accordion shield over that. Just be sure to keep the harness away from the exhaust, no matter how you wrap it.  

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Starter Wire Wrap (4/7)
 1/31/11 3:16pm
dskopp
Limited Member
Send Private Message

Oak Creek, WI - USA

Vette(s):
1981 Great White Shark. Red Interior, 350/190hp. PS, PB (SS), A/C CC, T-Tops, Going to remain as Stock as possible. Served three years in Active Duty Army, then Retired Air Force after 34 years! Badger State Vetts Car Club. 175,000 Original miles!!


Joined: 5/21/2008
Posts: 1958

I hafta agree with Joel.  You never know what you might need to do down the road,
"Go Packers:  See ya in Effingham !!
Dan


______________
          



(click to see a larger image)
Starter Wire Wrap (5/7)
 1/31/11 4:20pm
yostusota
Former Member

Send Private Message

York, PA - USA

Vette(s):
1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top


Joined: 5/18/2010
Posts: 1518


"Go Packers:  See ya in Effingham !!

Dan
[/QUOTE]
Cheesehead..gotta love it.
Rich

______________

My first parade at Carlisle 2010
Starter Wire Wrap (6/7)
 1/31/11 11:23pm
Adams' AppleLifetime Member
Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas


Joined: 11/8/2003
Posts: 20129

Uh...Dan?  I'm purdy shur the Packies is in DALLAS rite now...I kin SMELL em from here!

______________

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Starter Wire Wrap (7/7)
 1/31/11 11:51pm
daveo76
Former Member

Send Private Message

Vancouver, WA - USA

Vette(s):
1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.


Joined: 8/25/2005
Posts: 857

Well, no comments about the Packers or Steelers (Seahawks got booted a few games ago) but thanks for the advice about my wire wrap options.  Think I'll get me a roll of that friction tape - I've used that for other stuff before and it works pretty well.  And I did see the fusable links down there -- I'll make sure to not cover them up.  

______________

 

1976 Silver/Firethorn.  L48, 4spd.  Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Our Sponsors help support C3VR