I am going to change out my distributer and go with the HEI so do I need special plug wires and spark plugs.  Any suggestions on the best HEI dist. to go with and plugs etc. I have to have a tach drive dist. for the 68 which is a 350 engine. I have headers so I am concerned on high temp wires that will go with the HEI Distributer. Also the headers are very close to the Bosh plugs I have now. Would a shorter plug work for the 68. 

______________

I made this conversion on my 74. This si the best deal I found. http://www.dependonauto.com/heisbcandbbcdistributortachdrive.aspx

______________

DanT

Thanks, and I bought the dist. from dependonauto.com which was much cheaper then other sites. and my plug wires from Summit, Taylor made. Also added plug boots for protection on the new wires from my new headers at Summit. A little expensive on the protection boots though. I have the bosh platinum plugs but everyone tells me to get rid of them get a good AC plug. The vette runs great with the new distributer. Timed it a 4 degrees for the 350 and it seems to be just fine. Any suggestion on plugs though???

______________

I like NGKs..