Hi all,

Is this car an original A/C equipped car?
Did the car originally have P/S?
Where did the balancer pulley come from?

I'm not sure there is all that much difference in the P/S pumps for GM cars, as far as the shafts on them, and how far out/in they sit.
There are, however, many different pulley configurations available.
Did the pulley you get at C/C have any numbers on it...perhaps ink stamped?


______________

Joel Adams
C3VR Lifetime Member #56    
My Link


(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Joe, you mean you were at Carlisle and didn't stop to say Hi? I'm hurt!    Hope to see you (and thge Vette) at the next one! Don't be a stranger this time!

______________
"Down on the Boardwalk...

(Click image to see a larger version}

Not sure if this is relevant but I found info that said prior to 1975 a nut and woodruff key were used to hold on pulley and 75 up is the pressed on pulley, not sure if the pulleys would be different lining up to the crank pulleys?

yes I was in Carlisle,
and yes I'm sorry I didnt stop buy!
I was either selling parts on friday all day or buying parts on saturday all day.!

My pulley and pump both have a key.

Joel,
my car came with:...nothing....
All parts and engine were bought separately.
I am going to put on my alternator to see if that lines up.
Wish me luck.
Joe

Oh boy....thass gonna be a tough one, then...my only suggestion now would be to see if you can find someone/someplace that has a complete set of pulleys for a big block with P/S...or maybe you need a P/S pulley with two grooves...


______________

Joel Adams
C3VR Lifetime Member #56    
My Link


(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Why don't you make up for it, Joe, by going to Paul's Bar-B-Que!!!

______________
"Down on the Boardwalk...

(Click image to see a larger version}

Joel,

That's cool, Joe, we all want to see it, too! But you need to get a chance to meet some of the GREAT people that are on this site! I hate to say this but once you're hooked up with THESE guys you will always want to come back! As Dan (The Rook) said, it's a web site that became a club! Good luck!

______________
"Down on the Boardwalk...

(Click image to see a larger version}

Barry, I have had the pleasure of meeting several of the members over the last several years at carlisle, plus just talking with them here on the forum i can tell they are a great bunch. Don't worry though, I do plan on getting more involved with gatherings in the future. Have a great weekend! Joe PS: still trying to get my 2 groove pulley. Waiting to hear something from craigslist, also have been watching e-bay. i want to find one locally.