Thanks Gilbert. I'm going to shoot for 14 lbs to start. Called DCS and no return call today.... The cold start flagged a new code from the get-go. 34-MAP. That came on as soon as the engine started. I replaced the MAP about 8 months ago. So, I cleaned the electrical connector after the run.
The engine started and ran at 1200 rpm for about a minute. Then, it surged between 500 and 1200 rpm for about a minute. The surges gradually went away and the idle settled down at 800 rpm... The vane in the snorkel cycled ok. The ambient temp was around 80*F. I did not take her out for a drive. So, I did not hit the 40mph, TPS >0 so, the O2 did not come on line. But, I'm pretty happy for the moment.
Thanks
Keith
______________
Nobody ever waves when I'm driving the Explorer.
K Woody