The body measurements look right only difference is the overall length is 20" stock is 16.75". I believe the difference is in the length of the inlet and outlet necks. I was thinking of cutting the necks back. Has anyone used these or think they will work on my 82?

thanks,

Jon

 

I put a set of Magnaflows on my '68 that I got from Corvette Central.

 

They sell them with the outlet & inlets already welded on.

 

Check out part # 323454

 

Good luck,

Anthony

but has the same length as 14336

here is a pic of a dynomax on the 1980

Your 14336 will work fine.

John