Any of you folks around the Portland/Vancouver area know of a local carb shop that can handle Q-jets? I performed a minor rebuild on mine with a kit, but I think I want an expert to take a look if possible. I'd want someone to take the top off and check things like the needle and seat and float level, etc. Also looking for advice regarding a possible need to up primary jet size or change rods. The carb is bone stock now, but the car has dual exhaust and the EGR removed. Thanks.
______________
1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.