Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Smog Pump

in Forum: C3 Fuel, Emission Control, and Exhaust Systems


Already a Member?
Login
Not yet a Member?
Register for Free!

Back to top of thread

Smog Pump (6/16)
 10/1/08 8:35pm
mkapp7879
Former Member

Send Private Message

Joined: 10/21/2003
Posts: 1220

[QUOTE=mcgee0311]  I beginning to believe this set up is unique to the 75 and 76 year cars.[/QUOTE]
 
Probably so cause I don't see it on 78s or 79s.
Smog Pump (7/16)
 10/1/08 9:04pm
acplus
Former Member

Send Private Message

, - Canada

Vette(s):
1972, 1980


Joined: 6/23/2008
Posts: 558

You can remove the smog pump and any tubing related and cap off the vacumm line, by removing the pump it will leave a cleaner apperance. 
Smog Pump (8/16)
 10/2/08 12:27pm
mcgee0311
Former Member

Send Private Message

Fayetteville, AR - USA

Vette(s):
1976 Corvette L82 4sp - all original, current documented mileage is 9,532 miles; previous - 63 Conv 4 Spd Red/Blk; 64 Conv 327/300 4 spd with hardtop red/blk; 79 Coupe Auto T-Tops British Green; 79 Coupe 4 Spd T-Tops Hdrs Cam Bored & Stroked


Joined: 7/17/2008
Posts: 22

The interesting thing in researching the pump is that it injects fresh air into both exhaust manifolds through small metal lines.  There is a line for each side and each main line splits into four lines that connect into each port on the exhaust manifold for that side.  If I take off the pump, I wouldn't have a clue what to do at the exhaust manifold to cap off the air injection holes on the manifold.  '75 and '76 being the first years for this smog stuff are kinda wierd.
Smog Pump (9/16)
 10/3/08 11:27am
VetteSpecialties
Former Member

Send Private Message

Mounds View, MN - USA

Vette(s):
70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe


Joined: 5/24/2007
Posts: 1031

All the AIR system did was pump fresh air from the air cleaner into the exhaust to provide oxygen to finish burning the stuff left in the exhaust.  It doesn't affect the tune to remove everything and just plug the various holes.  Since so many people took them off and threw them away years ago, you probably want to hold onto everything you take off, or sell it to some lucky restorer.

Larry
Smog Pump (10/16)
 10/6/08 6:28pm
roadbiker
Limited Member
Send Private Message

Powder Springs, GA - USA

Vette(s):
1981 2-tone Claret. 4spd transmission, cloth interior, Gymkanna suspension, Glass T-Tops, A/C, Alloy Wheels, 28,000 original miles, prize-winning car in new condition.


Joined: 8/5/2008
Posts: 42

When I removed the cat from my '81 I only added a test pipe where the cat was located. The next step was to disconnect the belt and then the removal of the smog pump because it is nothing more than an eyesore and hides the nice valve-covers. Part of the removal of the pump was also the elimination of copper plumbing that led from the exhaust manifolds.  When I disconnected the pipes from the exhaust manifolds, I found some nice brass caps that screwed right on and sealed the manifolds.

However, the best thing I did was last spring when I replaced the stock exhaust manifolds with Hooker headers and a completely new exhaust system configured with an x-pipe.
 
I hope this helps.
Jim


______________

Smog Pump (11/16)
 10/6/08 6:58pm
roadbiker
Limited Member
Send Private Message

Powder Springs, GA - USA

Vette(s):
1981 2-tone Claret. 4spd transmission, cloth interior, Gymkanna suspension, Glass T-Tops, A/C, Alloy Wheels, 28,000 original miles, prize-winning car in new condition.


Joined: 8/5/2008
Posts: 42

One more thing... here's the description of the Air Management System from the '81 shop manual (page 6E1-5)...

The Belt driven air pump, AIR, is controlled by signals from the ECM and vacuum.During cold operation, air flows to the exhaust ports to help control HC and CO and help warm the engine and catalytic converter more quickly. During deceleration and wide open throttle oprtation, air is directed to the air cleaner to avoid excessive noise. Excessive air pump pressure is also directed to the air cleaner. After the engine is warmed up, air is directed to the lower bed of the catalytic converter to provide an oxidizing atmospherre for effective catalyst operation.

The air management system has an electric air management valve or valves that divert air to the sir cleaner or switches air between the catalytic converter and the exhaust ports.



______________

Smog Pump (12/16)
 10/7/08 5:55pm
gs77vet
Former Member

Send Private Message

Joined: 3/19/2005
Posts: 385

Remove the pump but keep it if you ever want to go back to catalitic converter. Keep your converter also, same reason. I removed all of the system on my 77 two years ago. Not only does it sound great it runs much better. You have to believe whom you want about getting more horespower. Mine sure feels like it has more. Gene
Smog Pump (13/16)
 10/8/08 10:26am
acplus
Former Member

Send Private Message

, - Canada

Vette(s):
1972, 1980


Joined: 6/23/2008
Posts: 558

Does your 4 tubes that go into the manifolds, still thread into the manifold, like a brake line and fitting. If so remove them and go to your local hardware store and buy some tappered brass plugs. If the lines cvan't be removed you can use a rubber exhaust 3/4" heat hose and put a brass or copper plug in the end of the hose with a clamp. The hose I am talking about is the one that was used to joint the exhaust tube diverter valve to the air pump hose.  You can also use the hose that is used to repair air tubes to the cat.
Smog Pump (14/16)
 10/8/08 12:51pm
mcgee0311
Former Member

Send Private Message

Fayetteville, AR - USA

Vette(s):
1976 Corvette L82 4sp - all original, current documented mileage is 9,532 miles; previous - 63 Conv 4 Spd Red/Blk; 64 Conv 327/300 4 spd with hardtop red/blk; 79 Coupe Auto T-Tops British Green; 79 Coupe 4 Spd T-Tops Hdrs Cam Bored & Stroked


Joined: 7/17/2008
Posts: 22

Thanks for all the advice.  I will take a look at the car and the AIM to see exactly what set up I have.  I figure that one of the options you all have presented will work for me.
 
Pat
Smog Pump (15/16)
 10/20/08 8:20pm
mcgee0311
Former Member

Send Private Message

Fayetteville, AR - USA

Vette(s):
1976 Corvette L82 4sp - all original, current documented mileage is 9,532 miles; previous - 63 Conv 4 Spd Red/Blk; 64 Conv 327/300 4 spd with hardtop red/blk; 79 Coupe Auto T-Tops British Green; 79 Coupe 4 Spd T-Tops Hdrs Cam Bored & Stroked


Joined: 7/17/2008
Posts: 22

I finally got into the smog pump this past weekend.  I got it removed cleanly and only had to plug one vacuum line after all was removed.  The exhaust tube that runs from the pump to the driver's side exhaust pipe is held in place with one of the exhaust manifold bolts.  You don't have to remove the bolt entirely (which I did) because the mount is sloted.  Simply loosen the bolt and the exhaust tube and backflow check valve will slide right off.  There are three bolts that hold the pump.  One is on the bracket that allows tension to be put on the belt; comes off easily.  The second one is the longest of the three and will not slide all the way out without taking the pulley off the pump.  The final bolt holds the tension bracket in place and is easily removed.   Now I have true duals, no cat, and no smog pump.  It sure feels like the engine has more pep; maybe it's just me.  But, sure like the sound.
Smog Pump (16/16)
 10/20/08 11:27pm
acplus
Former Member

Send Private Message

, - Canada

Vette(s):
1972, 1980


Joined: 6/23/2008
Posts: 558

The motor will have more pep without the drag of the pump and better exhaust flow.
Our Sponsors help support C3VR