I have a 78 Silver Anniversary t top..Found the build sheet behind carpet passenger side behind carpeting..in poor condition.
Secured the original factory to dealer invoice and window sticker for the car from GM Archive folks.
Car came equipped with P255/60 R15 RWL tires, factory #8YQBS, window sticker option designated as #QBS.
I cannot tell that the fender wells have been trimmed back..the fender lips are there and continuous from front edges to rear edges down by the rocker panel aluminum chrome-black trims.
Rocker panel trim pieces are 65.25" long.
My rocker panels are in fine condition, but need repainting on the lower black portion.I looked at repacement rocker panels and one of the Corvette parts suppliers shows rocker panels that are two differing lengths for the C3.
The tires I replaced with are BFG P255/60 15 RWL..
They don't rub on the fenders..
I did notice a 2" wide vertical rubbed mark on the dirt-grease-oil of the FRAME where the tires have lightly made contact-rubbed in time past when steering is fully locked for a tight turn..
I've never locked the steering that tightly when driving or even at very slow speed myself.
Anyone else seen that rubbed mark on the frame?..Jim
______________