Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Changing Flat

in Forum: C3 Handling Components


Already a Member?
Login
Not yet a Member?
Register for Free!

Changing Flat (1/4)
 5/23/09 10:39am
Tex
Former Member

Send Private Message

Kennebunkport, ME - USA

Vette(s):
1981


Joined: 1/5/2009
Posts: 11

Guess I've never had a flat before. I have an 81; got the lug nuts off but wheel won't budge.
 
   Do I have to remove the hub cap?
 
thanks  
Our Sponsors help support C3VR
Changing Flat (2/4)
 5/23/09 10:48am
eboLifetime Member
Lifetime Member
Send Private Message

Holland Patent, NY - USA

Vette(s):
#1 *1980 White, Red interior 14,000 mile #2 *1980 Red, Oyster interior 93,000 miles Resto project car, rebuilt to 383 stroker


Joined: 6/3/2008
Posts: 4421

Nope the alum wheel has bonded to the hub where the wheel studs are. Your guna have to thump on it a little. If you have a piece of 4x4 and a good size hammer try hitting the tire area first. If you have to hit on the rim itself protect it with a thick towel and use the board. Do not hit the rim direct with the hammer, spread the blow out using the wood. when you put it back on clean both surfaces and put some anti seize or a little grease in the old stuck areas.
Take your time and don't damage your rim or hit your finger! Wits EndCensored
Good Luck  Evil Smile 
ebo2009-05-23 07:49:46

______________

Click on image for larger view!

LIFETIME MEMBER 151
Evil Smileebo
Changing Flat (3/4)
 5/23/09 11:28am
Tex
Former Member

Send Private Message

Kennebunkport, ME - USA

Vette(s):
1981


Joined: 1/5/2009
Posts: 11

    Thumping it worked. Great suggestion; saved me a lot of time.
 
       Really appreciate the wisdom.
 
 
Changing Flat (4/4)
 5/23/09 11:46am
eboLifetime Member
Lifetime Member
Send Private Message

Holland Patent, NY - USA

Vette(s):
#1 *1980 White, Red interior 14,000 mile #2 *1980 Red, Oyster interior 93,000 miles Resto project car, rebuilt to 383 stroker


Joined: 6/3/2008
Posts: 4421

Mark, super, glad it worked out for you.
My father in law was a heavy truck mech. One of the smartest people I have ever met. He had a Chevy liesure van in the 80's with real pretty white powder coated alum rims. He had a flat on the road and that rim was stuck so bad. He did not have any wood being along side of the road and after many cussing minutes with no luck.....he beat the livin crap out of that wheel. He was still so mad when he got home he took the other three off and went out and bought new steel wheels for his van. After many garage sales he finally just gave them away still cussing at them.
Oh the memories........have a great weekend......now go take that C3 out for a shake down run!
Evil Smileebo


______________

Click on image for larger view!

LIFETIME MEMBER 151
Evil Smileebo
Our Sponsors help support C3VR