so the lock just spins, and i cant get it to open. whats the best way to get it open with out effin it up? thanks in advance..

Curious. Since the internal cylinder can't spin free inside the housing, you have to wonder what's holding the door closed. With the help from my brothers here at the forum, I've only just discovered how to remove the cylinder from the housing but can't really imagine what's going on there without messing with it . I'm sure our members will have some thoughts on the matter but till then, I'll fiddle with one and see what I might find and report back.

______________

Jimmy B.
Just can't wait to get on the road again.

 
                             Click to see larger views!

OK, i think whats happening is .... the whole in the door where the lock goes has a notch so when the lock is held in place with the nut that threads to the lock is torqued down, it will hold the cylinder in place. what i think happened is the nut is so loss that the tab on the cylinder os out of the notch. you might have to remove the cylinder off the and tighten everything up. does it spin when the glove box door is open or closed?

Get KATO to open it.  Just couldn't pass that one up.

______________

 

Lifetime Member #116
Dave's '82

   

the door is closed...  cant get it open. im going to try and see it i can get in there with a small hook to open it.

Insert the key into the lock.  Hold the cylinder with a small screwdriver, door should open.  As a last resort you can use a BFH !!!!  lol

______________
          



(click to see a larger image)

What glovebox???!!!  All I have is 3 cubby holes behind the front seats - if those are gloveboxes, it's a JOKE..........

______________

�����
My Link


MICK - C3VR Lifetime Member #113