ring my tech beeped the horn which works, but then the
horn button and corvette center fell off the steering wheel. It was being held on by 2 pieces of electric tape??. It worked for a good many years but with it sitting outside at the garage and the heat we have been having it finally came off. Ok so what is the proper way to re-attach the 4 inch circle horn button to the steering wheel?
Thanks
Babyblue 78
Sorry about the spelling error. When the tech pushed the horn button it fell off .
Personally, I'd go with some 3M double-sided tape. That stuff is usually super strong!
-Adam Wartell
NCM Lifetime Member #1222
Founder: C3 Vette Registry
C4 Vette Registry, C6 Vette Registry
My first Vette, now owned by JB79:
While I haven't had mine off in a number of years, it seems like it had a series of spring fingers on the back side that snapped on. If those are missing, then you could just buy a new one. But 3M VHB tape will probably work also. 🙂
1973 L-82 4 spd
Mine has the spring clips, but the horn button kept coming off -- I use some blue LockTite on the spring clips and it holds great. It takes a bit of prying to get it off again, but it does come off if needed.