Welcome. I have a problem. I miss the part in the front spoiler. I do not know what I should buy. I do not have photos of what it looks like in reality.
I think it is this element.
____________________________________
Vette 1982 Collector Edition
Vette(s): 1981 Blue Ice Met. w/pearl ghost flames
TKO500 5speed.
LS1 Swap
3.45 Dana 44.
Joined: 12/3/2001
Posts: 2377
You will need Part #1182, 33516, X2167.
Those parts are very important for proper airflow to the radiator.
The lower valance is a body color match item. The lower extensions are rubber. And you will need some hardware to assemble it.
Make sure the bolt holes on the bumper cover aren't ripped or torn badly. Otherwise you'll have to have them either repaired or replace the bumper cover. If they are torn and your cover is really wavy I would replace it with a "Tru-Flex" bumper cover.
Good luck!
____________________________________
GEN III 5.7L "LS6" Engine swap TKO500 5 spd.
3.54 Dana 44
'69 "N11" Sidepipes Borgeson Steering Box Born 8/1981
Sequence #3975
Do you think the lower rubber extensions are necessary? They sort of look like a squeegee; I am thinking of removing mine. Not sure if it will have that "somethings missing" look.
Vette(s): 1981 Blue Ice Met. w/pearl ghost flames
TKO500 5speed.
LS1 Swap
3.45 Dana 44.
Joined: 12/3/2001
Posts: 2377
Those look like bumper cover retainers. I'll have to crawl under mine to see what the body shop used to attach the lower valance and rubber air dams.
@Duane, I think those rubber air dams are necessary to help promote proper air flow to the radiator. Plus the lower you can keep a lower spoiler or air dam to the ground on a car, the less air that can get underneath the car lessening the "lift" on the front end at high speeds. My theory is if they (GM) engineered it...it get's put back on. Plus you will have that "missing part" look to all of us that own these cars.
Good illustration Bob.
|UPDATED|9/28/2013 7:55:58 PM (AZT)|/UPDATED|
____________________________________
GEN III 5.7L "LS6" Engine swap TKO500 5 spd.
3.54 Dana 44
'69 "N11" Sidepipes Borgeson Steering Box Born 8/1981
Sequence #3975
Corvette is a registered trademark of the General Motors Corporation(GM) &
Chevrolet Motor Division. Vette Registries, LLC is responsible for all site content (except for member submitted content or where otherwise
noted) and does not claim or imply that Chevrolet or
GM is responsible for Official C3 Vette Registry content. Vette Registries, LLC is independent from GM and is not affiliated
with, sponsored or supported by GM. Copyright/trademark/sales mark
infringements are not intended, or implied and are in fact used to support
GM, Chevrolet and Corvette.
Official C3 Vette Registry content is Copyright 2001-2018, Vette Registries, LLC. Content may not be reused without written consent. All Rights Reserved. NS
Corvette (Vette) Model Years on this site: 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
30