I'm trying to adjust my wiper door to fit close to the body in the closed position. Mine sits too high for some reason. I have the spacers in place. Is there something else I should be looking at or adjusting?
I had the same problem and found out that I had the wrong windshield wipers. I had put on a new modern pair and learned that the originals are much smaller. The newer ones would not let the door close all the way. Once I put a correct pair on, the problem was solved. Maybe your issue is a simple as that? BlueX22010-04-26 22:20:35
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
If you don't have something in the way, there are two adjustments. First, there are stops in the outer corners of the transmission that hit on the cowl. There is quite a bit of adjustment there. Also, the entire assembly is adjustable where it bolts to the firewall, including the ability to shim it forward or backward as needed.
Corvette is a registered trademark of the General Motors Corporation(GM) &
Chevrolet Motor Division. Vette Registries, LLC is responsible for all site content (except for member submitted content or where otherwise
noted) and does not claim or imply that Chevrolet or
GM is responsible for Official C3 Vette Registry content. Vette Registries, LLC is independent from GM and is not affiliated
with, sponsored or supported by GM. Copyright/trademark/sales mark
infringements are not intended, or implied and are in fact used to support
GM, Chevrolet and Corvette.
Official C3 Vette Registry content is Copyright 2001-2018, Vette Registries, LLC. Content may not be reused without written consent. All Rights Reserved. NS
Corvette (Vette) Model Years on this site: 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982