I am also trying to restore the shine to my 78 aluminum wheels and I need some advice. I hand rubbed them with Mother's aluminum polish and they look much better, but nowhere as nice as I have seen on some. Plenty of black residue when I rubbed them with the paste. Would you also recommend using a linen pad on a drill and what type of polish should I use with it?
Barry, If can get some aluminum wheel acid from a detail shop or supplier and wash your wheels with that first it take a lot of the oxidation off. Then come behind that with a edge wheel and your polish. Wenol makes a real good cleaner and polish. Good luck it takes times.
Barry, An edge is the buffing wheel that you are speaking off. You can get them at Home Depot in a get that comes with compound and polish or just the wheel itself. It is a cotton cover and does a real fine job.
Corvette is a registered trademark of the General Motors Corporation(GM) &
Chevrolet Motor Division. Vette Registries, LLC is responsible for all site content (except for member submitted content or where otherwise
noted) and does not claim or imply that Chevrolet or
GM is responsible for Official C3 Vette Registry content. Vette Registries, LLC is independent from GM and is not affiliated
with, sponsored or supported by GM. Copyright/trademark/sales mark
infringements are not intended, or implied and are in fact used to support
GM, Chevrolet and Corvette.
Official C3 Vette Registry content is Copyright 2001-2017, Vette Registries, LLC. Content may not be reused without written consent. All Rights Reserved. NS
Corvette (Vette) Model Years on this site: 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982