Just wanted to know if there is anyone out there running any other intake besides the edelbrock Performer that fits under the stock hood on a 72. From what I understand there are not many options to choose from. Just wondering if anything else works. Thanks Rodney
Vette(s): 1975 Corvette coupe, 4 speed manual, 383 ci 9.5:1,Edelbrock dual plane Air Gap intake, Alum Heads,Comp Cam, roller Rockers, PS,PB,Tilt
I have an Edlebrock Dual Air Gap in a 1975 wit a 383 and with a stock hood. I have a Quick Feul 750Q, a recessed lower airfilter plate around carb and a 2 1/5" air cleaner. I tried the 3" air filter and got a slight bit of interference. I have no hood insulation so that may help. One day I will try the 3" air filter again and get some silly putty on top of the circumference of the air cleaner to see esactly how much clearance I have at each location.
For whatever it's worth, I have a Cyclone Plus dual plane intake, a Holley Street Avenger 770-cfm carb, and a 3-inch air filter on my L-48, 350 in my '80. I also have no insulation on my hood and I have no interference.
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Us guys with the later cars won't normally have the same hood interference issues as the earlier('68-'72) cars. The hoods on the later cars were a little taller in the center anyway. Especially the '73-'76 cars with the cowl induction hoods. The earlier cars with the big block/LT1 hoods did have a little more clearance than the "normal" hoods, but not a lot. One big problem with the earlier hoods, and taller air cleaners/intakes is the stud/wingut for the air cleaner poking a hole in the hood...
____________________________________ Joel Adams C3VR Lifetime Member #56 My Link
Vette(s): 1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top
From what I know on mine I have about 1/2 inch from the wing nut to the hood..I think the Performer 2101 is the same hieght as the stock intake is..I checked it out when I got a new bolt and wing nut that had GM written on it.. don't tell Ethan that his play dough worked real good for this!! oh and if you use play dough to check it put a little flour on it so it doesn't stick to everything!
Vette(s): 79 L-82 4-speed. Engine stock except long tube headers. Previous owner replaced upholstery and carpet with OEM. I replaced and upgraded steering and suspension.
There are many available that will fit under the stock hood. Most websites, Edelbrock, Weiand, Trick Flow and others, give the A+B=Average height numbers for their manifolds. See the photo below I got from the Edelbrock website. The stock on my 79 L-82 was A= 3.75. B= 4.75 = average 4.25. According to the Edelbrock website the Performer 2701 is A= 3.74. B= 4.80 = Average 4.27 which means it is only .02 inches taller than the stock. Here are a couple other possibilities that will fit with a different air cleaner.
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
Years ago, I helped a friend paint his '72 with House of Color Candy Red. He then built a 383 for it. A few days before the biggest drag race weekend of the year, we were "testing" on the country roads, when there was a BANG. I looked in the rearview mirror and saw engine parts bouncing in the road. We towed the car home and scrambled to pull the tunnel-rammed small block from my pro-street car. After a couple days of welding adapters of every sort, we were done except for the hood. We found a servicable small block hood, used the sawsall, and painted it flat black. We had a great weekend of racing, after which my daughter announced we were leaving the engine in for a few weeks so she could drive, too. She was quite the hot-rodder, but had never driven a stick. So we trailered the car to the industrial park where I worked and spent a few hours doing full passes down the streets. Eventually the police came and told us to stop. When we went to the next drag weekend, she was having so much fun she forgot to look at the tach. It was an engine you shifted at 8,800 RPM, and she over-revved it! I have it on video. The sound turned into just a screech as it went past 9,000 RPM. It only had one spun rod bearing. A little fixing, and it was good as new. That engine went into several cars over the years, and finally met it's end in a sand rail in Las Vegas.
Vette(s): 69 Vette.LeMans blue w/383 stroker- AED 950 HO modified carb -Weiand team "G" intake -AFR 210 heads- solid roller cam- 21/2 in side exhaust. Muncie M-21 trans and 4.56 rear. Used for dragracing and cruising,
I'm running the short Weiand Team-G single plane with a Holley 750 HP and it just fits under my '69 small block hood. Tom the 692010-12-29 13:52:39
My 68 with a non original 427 B/B and a adapter plate for the 750 holley has proven to be a real hassel.Last year at Hot August Nights in Reno Nv i had to leave the hood unlatched or suffer the consequences. Currently have edelbrock rpm but for a quadrajet. Will change intake this spring,I enjoy the info members put on this sight.Thank you.
[QUOTE=Rocky] My 68 with a non original 427 B/B and a adapter plate for the 750 holley has proven to be a real hassel.Last year at Hot August Nights in Reno Nv i had to leave the hood unlatched or suffer the consequences. Currently have edelbrock rpm but for a quadrajet. Will change intake this spring,I enjoy the info members put on this sight.Thank you.[/QUOTE]
Corvette is a registered trademark of the General Motors Corporation(GM) &
Chevrolet Motor Division. Vette Registries, LLC is responsible for all site content (except for member submitted content or where otherwise
noted) and does not claim or imply that Chevrolet or
GM is responsible for Official C3 Vette Registry content. Vette Registries, LLC is independent from GM and is not affiliated
with, sponsored or supported by GM. Copyright/trademark/sales mark
infringements are not intended, or implied and are in fact used to support
GM, Chevrolet and Corvette.
Official C3 Vette Registry content is Copyright 2001-2018, Vette Registries, LLC. Content may not be reused without written consent. All Rights Reserved. NS
Corvette (Vette) Model Years on this site: 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982