Topic: Tremec Overdrive Transmission Kit
in Forum: All Vettes (Non-C3s) For Sale/Wanted
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime Member
Is the kit from American Powertrain, or the now defunct Keisler Engineering or another source?
What is the part number of the kit?
Is the kit still under warranty?
I already have a kit in mine, but these are important details for someone here who would possibly consider buying it.
Thanks, Sarge
TKO500 5 spd.
Borgeson Steering Box
Born 8/1981
Sequence #3975
Click here to see more pics of my Vette on CarDomain.
Lifetime Member #26
Hi Sarge,
It is one from Keisler, I bought but never installed. Here are the
specs
Keisler Engineering key points:
1. Authorized warranty center for Tremec
2. Factory type leak inspection on all transmissions
3. In-house quality control and assembly
4. Keisler`s PerfectFit/Performance shifter has a shorter throw, no shifter
slop and correct
geometry compared to the Hurst Sidewinder shifter
5. Built-in shifter noise reduction
You will see a dramatic reduction in noise, vibration and harshness with
this swap in addition to
a 30-50% increase in fuel economy!
0.00 0.00T
TRG-RO5009A, KEISLER 600HP/600FT-LB 5-SPEED TRANSMISSION ASSEMBLY,
INCL:
KEISLER CUSTOM BUILT TKO-600 WITH LOW PROFILE INTERNAL OFFSET
SHIFTER,
MINI-BILLET SHIFT TOWER WITH SPECIAL 2-BOLT LEVER, 4616 CHROMOLOY
GEAR
SET, 1PC COUNTER SHAFT, DUAL SPEEDO OUTPUTS, REVERSE & NEUTRAL
SWITCH
OUTPUTS, 99LB WEIGHT, RATIOS: 2.87, 1.89, 1.28, 1.0, 0.64
1 3,295.00 3,295.00T
C2 1963-1967 PRECISION BALANCED DRIVESHAFT WITH STRAP-TYPE SLIP YOKE
AND 1310 FRONT U-JOINT, 1310 REAR U-JOINT
1 0.00 0.00T
CROSSMEMBER/ISOLATOR BRACKET FOR C2 1 0.00 0.00T
ISG-622378, TRANSMISSION MOUNT, GM-TKO AND MOPAR A41, RUBBER 1 0.00
0.00T
SHORT SPEEDOMETER CABLE, THREAD ON TYPE
S.O. ENTRY ONLY. CORRECT PART TO BE DETERMINED AFTER DIFF. GEAR RATIO
ADVISED BY CUSTOMER.
1 0.00 0.00T
REVERSE LIGHT WIRING HARNESS PER REVISION 0 1 0.00 0.00T
PBG-57080, SUPER HD NEEDLE PILOT BEARING, GM APPLICATIONS 1 0.00
0.00T
HWG-PACK A, PACK A, TRANSMISSION-BELLHOUSING HARDWARE 1 0.00 0.00T
HWG-PACK B, PACK B, ISOLATOR-CROSSMEMBER HARDWARE 1 0.00 0.00T
SPEEDOMETER CONNECTION HARDWARE, INCLUDES CLIP, 2 O-RINGS, BOLT AND
LOCK WASHER
1 0.00 0.00T
SHIFT LEVER HARDWARE FOR TKO, T-56, AND T45 1 0.00 0.00T
HWG-PACK H, PACK H, ISOLATOR-TRANSMISSION (TKO500/600) HARDWARE 1 0.00
0.00T
MAG-00602, INSTALLATION MANUAL, TKO, GM, CORVETTE 1963-67, REV. 3 1 0.00
0.00T
SLG-C2V-NP5, C2 NAMEPLATE, 5-SPEED 1 0.00 0.00T
DUST COVER WITH MOUNTING SCREWS 1 0.00 0.00T
TRG-C2V600-64, KEISLER 650HP 5-SPEED KIT TOTAL: INCLUDING NEW CLOSE
RATIO
TRANSMISSION AND ALL BASIC INSTALLATION COMPONENTS FOR 1963-67
SEAT PAN BUSHING FOR C2 VETTE PER REVISION 0, 2 required/car
Thank you for posting all the details Rusty. 
TKO500 5 spd.
Borgeson Steering Box
Born 8/1981
Sequence #3975
Click here to see more pics of my Vette on CarDomain.
Lifetime Member #26
in Forum: All Vettes (Non-C3s) For Sale/Wanted
SPONSOR AD: (Our Sponsors help support C3VR)