Home page
SPONSOR AD

Topic: 1977 T Top adjustments, Help!

in Forum: C3 Body


1977 T Top adjustments, Help!

Posted: 5/25/22 2:38pm Message 1 of 4
Former Member
Send PM
Milford, DE - USA
Joined: 11/6/2021
Posts: 67
Vette(s): 1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black

My T top on the passenger side sticks up on the corner (See Pic). How can I adjust this to fit flush?..

Drivers side not as bad.




SPONSOR AD:: (Our Sponsors help support C3VR)

Re: 1977 T Top adjustments, Help!

Posted: 5/25/22 2:51pm Message 2 of 4
Former Member
Send PM
Milford, DE - USA
Joined: 11/6/2021
Posts: 67
Vette(s): 1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black

Ok..I found the peoblem. The star( See Pic) is not align to fit into slot on top. Hoiw do I adjust this..Cannot seem to get it to turn to align up.




Re: 1977 T Top adjustments, Help!

Posted: 5/25/22 3:44pm Message 3 of 4
Former Member
Send PM
Milford, DE - USA
Joined: 11/6/2021
Posts: 67
Vette(s): 1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black

I have adjusted everything that I can think of...No Better. Its like its hitting on something, I got the star to align with receiver part on top, I adjust the finger points that go into the center beam and have a perfect gap alignment.

I have no idea why it wont close farther!

 

Beyond frustrated!




Re: 1977 T Top adjustments, Help!

Posted: 5/25/22 8:00pm Message 4 of 4
Limited Member
Send PM
Overland Park, KS - USA
Joined: 7/9/2003
Posts: 914
Vette(s): 1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day. 2023 Accelerate Yellow HTC Stingray

I'm not sure but if I remember correctly, the plate that the threaded stud with the triangular head on it screws into is adjustable if you loosen the two mounting screws.

If you can push the corner down when you press on it then you can increase the clamping force which is adjustable.




1973 L-82 4 spd

in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)