Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: 1977 T Top adjustments, Help!

in Forum: C3 Body


Already a Member?
Login
Not yet a Member?
Register for Free!

1977 T Top adjustments, Help! (1/4)
 5/25/22 1:38pm
Mark Laird
Former Member

Send Private Message

Milford, DE - USA

Vette(s):
1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black


Joined: 11/6/2021
Posts: 67

My T top on the passenger side sticks up on the corner (See Pic). How can I adjust this to fit flush?..

Drivers side not as bad.

Our Sponsors help support C3VR
Re: 1977 T Top adjustments, Help! (2/4)
 5/25/22 1:51pm
Mark Laird
Former Member

Send Private Message

Milford, DE - USA

Vette(s):
1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black


Joined: 11/6/2021
Posts: 67

Ok..I found the peoblem. The star( See Pic) is not align to fit into slot on top. Hoiw do I adjust this..Cannot seem to get it to turn to align up.

Re: 1977 T Top adjustments, Help! (3/4)
 5/25/22 2:44pm
Mark Laird
Former Member

Send Private Message

Milford, DE - USA

Vette(s):
1977 C3 Auto Coupe Lt Blue/Dk Blue Prev. 1968 C3 convertible 4spd Red 1984 C4 Automatic Silver 2000 C5 Automatic Black


Joined: 11/6/2021
Posts: 67

I have adjusted everything that I can think of...No Better. Its like its hitting on something, I got the star to align with receiver part on top, I adjust the finger points that go into the center beam and have a perfect gap alignment.

I have no idea why it wont close farther!

 

Beyond frustrated!

Re: 1977 T Top adjustments, Help! (4/4)
 5/25/22 7:00pm
73shark
Limited Member
Send Private Message

Overland Park, KS - USA

Vette(s):
1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day.


Joined: 7/9/2003
Posts: 894

I'm not sure but if I remember correctly, the plate that the threaded stud with the triangular head on it screws into is adjustable if you loosen the two mounting screws.

If you can push the corner down when you press on it then you can increase the clamping force which is adjustable.



______________

1973 L-82 4 spd

Our Sponsors help support C3VR