Home page
SPONSOR AD SPONSOR AD

Topic: Another hinge question

in Forum: C3 Body


Another hinge question

Posted: 12/7/04 6:38am Message 1 of 2
Former Member
Send PM
Pinllas Park, FL - USA
Joined: 5/12/2004
Posts: 68
Vette(s): 69' 427/435 Tri-power 4-speed.
The driver's door on my 69 is sagging baddly, i noticed the bushing are busted out and all but gone. My question is what is the easiest way to replace this... just a heads up will help alot as i have not done this before.


TIA,


Tom


69' 427/435 4-speed. #matching LR (Tri-power). |IMG|http://home.tampabay.rr.com/tommyab/images/personal/lrear.jpg|/IMG|
SPONSOR AD:: (Our Sponsors help support C3VR)

Another hinge question

Posted: 12/7/04 10:10am Message 2 of 2
Former Member
Send PM
baytown, TX - USA
Joined: 4/21/2004
Posts: 160
Vette(s): 1979 maui blue/doe skin, fuel injected 383, 6-speed manual, hooker sidepipes, 3.90 gear
I had to change those on a mid 80 camaro and supported the door with a floor jack, then drove the pin out, changed the bushings then reinstalled the pin. The coil spring was a mother to get back in but I done it. Hope this helps.


in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)