Home page
SPONSOR AD SPONSOR AD

Topic: chrome bumbers

in Forum: C3 Body


chrome bumbers

Posted: 7/9/06 7:29pm Message 1 of 10
Former Member
Send PM
Mystic, CT - USA
Joined: 1/12/2006
Posts: 69
Vette(s): 1970 350cid/350hp 4 speed Mulsanne Blue/blue interior, convertible/white top, original engine, PS, PB, rally wheels.
Hello everyone, I have a question regarding rechroming bumpers.  The original rear bumpers on my 70 are really in need of a rechrome.  I am considering doing an exchange.  I saw in the NCRS driveline a guy that offers to take your old bumpers and send you another set of already rechomed bumpers.  My first question is there likely to be a fit issue?  Wondering if anyone has any comments on this.  Thanks in advance....  My problem is I hate waiting for anything and it takes months for a rechrome I am told.


SPONSOR AD:: (Our Sponsors help support C3VR)

chrome bumbers

Posted: 7/10/06 8:53am Message 2 of 10
Lifetime MemberLifetime Member
Send PM
Frederick, MD - USA
Joined: 2/20/2003
Posts: 548
Vette(s): Frederick County Corvette Club (Maryland) Tan 64 365 Hp Conv 4 sp Red 72 4 sp Conv ..running a '68 327 Blue 76 Coupe L 48 4 sp White 79 Coupe L 82 auto Silver 98 Conv, 6 sp 35th Anniv '88 vette

Personally I would have my own original set rechroimed ...

I've been the route of cheap replacements (bumper boys) and NEVER AGAIN....

Bob



Bob
64,72 & 98 Corvette Ragtops
76 & 79 & qa 88 ANC Corvette Coupes

Click on any image for larger view!

chrome bumbers

Posted: 7/10/06 9:40am Message 3 of 10
Former Member
Send PM
Mystic, CT - USA
Joined: 1/12/2006
Posts: 69
Vette(s): 1970 350cid/350hp 4 speed Mulsanne Blue/blue interior, convertible/white top, original engine, PS, PB, rally wheels.
Yeah, I saw Bumper Boyz online and got the feeling I should stay clear.  I suppose I should just wait until winter and get originals rechromed.  Unless anyone has done an exchange with someone and been pleased.  Let me know.  Thanks.


chrome bumbers

Posted: 7/10/06 9:02pm Message 4 of 10
Former Member
Send PM
Australia
Joined: 5/6/2004
Posts: 535
Vette(s): 71 Coupe Black on Black

I was a bit wary to get on this thread when I saw the subject.

Don't drive around with them off the car, the mountings help support all that fibreglass at the back.




chrome bumbers

Posted: 7/11/06 4:00am Message 5 of 10
Former Member
Send PM
KERNERSVILLE, NC - USA
Joined: 1/13/2004
Posts: 1355
Vette(s): 1968 L-71 convertible

I'd also like to know of a source for good bumpers, mine aren't worth rechroming, some p.o. actually drilled a couple of holes in them.

I was lucky enough to latch onto a NOS front several years ago, so I have 2 good front bumpers.




chrome bumbers

Posted: 7/11/06 7:19am Message 6 of 10
Lifetime MemberLifetime Member
Send PM
Frederick, MD - USA
Joined: 2/20/2003
Posts: 548
Vette(s): Frederick County Corvette Club (Maryland) Tan 64 365 Hp Conv 4 sp Red 72 4 sp Conv ..running a '68 327 Blue 76 Coupe L 48 4 sp White 79 Coupe L 82 auto Silver 98 Conv, 6 sp 35th Anniv '88 vette
I notiuced the other day that my old rear bumpers are hanging from the
rafters in the garage... they were NOT too bad when I purchased new ones...BUT boy 10 years in a garage have almost turned them green...

??? oh well  at kleast the mice did not eat them...

Bob G.



Bob
64,72 & 98 Corvette Ragtops
76 & 79 & qa 88 ANC Corvette Coupes

Click on any image for larger view!

chrome bumbers

Posted: 7/11/06 9:54am Message 7 of 10
Former Member
Send PM
Mystic, CT - USA
Joined: 1/12/2006
Posts: 69
Vette(s): 1970 350cid/350hp 4 speed Mulsanne Blue/blue interior, convertible/white top, original engine, PS, PB, rally wheels.
Thanks for the advice about not driving with the bumpers off the car.  I don't think I would because it would look awful but also don't want to compromise the fiberglass.  My rear drivers side bumper has a hole that is filled with a bolt from a CB antenna I assume.  Can't the person who does the rechrome fill and make it look like the hole was never there?  That would be good to know because if not I may have to buy new.  I have been told that the finish on new bumpers isn't as nice as on rechromed.  It's always somethin....


chrome bumbers

Posted: 7/11/06 12:04pm Message 8 of 10
Lifetime MemberLifetime Member
Send PM
VENTRESS, LA - USA
Joined: 10/8/2003
Posts: 87
Vette(s): 1971 Blue Roadster, sb400, cam, electronic ignition,10 disc CD changer, 2.5" chambered exhaust, 3.36 rear,tremec 5 speed from Classic Chevy, fiberglass rear spring and vintage air.
I'd check around locally for re-chrome. Local street rodders usually know who in your area does good work, they chrome everything. Chrome shops can fill holes no problem.


chrome bumbers

Posted: 7/12/06 2:32am Message 9 of 10
Former Member
Send PM
Mesquite, NV - USA
Joined: 10/24/2005
Posts: 16
Vette(s): 82

This company is suppose to be excellent, they have been on my classic car TV show:

 

Paul's Chrome Plating
Evans City, PA
Phone: 800-245-8679
Fax: 724-538-3403
Web: www.paulschrome.com




chrome bumbers

Posted: 7/12/06 8:07am Message 10 of 10
Former Member
Send PM
Mystic, CT - USA
Joined: 1/12/2006
Posts: 69
Vette(s): 1970 350cid/350hp 4 speed Mulsanne Blue/blue interior, convertible/white top, original engine, PS, PB, rally wheels.
Thanks, I will give Paul's a try!


in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)