Home page
SPONSOR AD SPONSOR AD

Topic: DOOR GLASS ADVENTURES?!

in Forum: C3 Body


DOOR GLASS ADVENTURES?!

Posted: 3/19/08 2:20pm Message 1 of 6
Former Member
Send PM
Joined: 12/7/2003
Posts: 5
Vette(s): 81 frost beige - manual
Good afternoon ALL,
 
I am having to replace the drivers side door glass, (and a b$%$ load of other things) on my 81.  Other than all the horror stories that I have run across, has anyone had any luck as a "do-it-yourselfer" in this area?
 
ANY AND ALL ADVICE WELCOMED!
 
Jerry



SPONSOR AD:: (Our Sponsors help support C3VR)

DOOR GLASS ADVENTURES?!

Posted: 3/19/08 6:54pm Message 2 of 6
Former Member
Send PM
Falls Church, VA - USA
Joined: 3/22/2006
Posts: 232
Vette(s): 1975, 4 speed, L48, NOW Silver mist, Oxblood inside 2003 50th Av Torch RED little brother to 75
I have removed my 75s a few times its not as bad as removing a window regulator.  A GM repair manual or AIM (GM assembly line manaul) are great for this. You may only have to remove the door panel. Then remove the top window stops. After that roll the window all the way up and aline the bolts that secure the window to the rail and remove them. Window should slip right up out of the channnels. 81 maybe different than my75, hope this helps.
 
Guy



DOOR GLASS ADVENTURES?!

Posted: 3/20/08 1:44am Message 3 of 6
Former Member
Send PM
Falls Church, VA - USA
Joined: 3/22/2006
Posts: 232
Vette(s): 1975, 4 speed, L48, NOW Silver mist, Oxblood inside 2003 50th Av Torch RED little brother to 75
Jerry check out http://CorvetteMagazine.com
 - Home article there titled Window Regulator Roller. This may help lots more than I can Lots of Pictures and text. Thanks
 
Guy
dwright2008-03-20 02:25:45


DOOR GLASS ADVENTURES?!

Posted: 3/20/08 5:35am Message 4 of 6
Former Member
Send PM
Horse Cave, KY - USA
Joined: 10/22/2007
Posts: 488
Vette(s): 1968 convertible; 1980 L-82
Be extremely careful.  Door glasses are heavier than they ought to be regardless of the fact the 80-82 glass is supposed to be lighter than the older cars.  The door shell is stamped steel and has sharp edges around the punched openings.  If that door glass falls, you could seriously damage a finger.
 
AIM and GM service manaul are pretty much musts for this job.
 
 
This might help.  Shows door innards with door skin removed.  View won't be quite as clear working from the other side of the door.
 
Smile
6880Mike2008-03-20 05:39:15


DOOR GLASS ADVENTURES?!

Posted: 3/20/08 6:26am Message 5 of 6
Profile Pic
Former Member
Send PM
Cramerton, NC - USA
Joined: 8/22/2006
Posts: 1094
Vette(s): black 1982 coupe slate gray interior, 350 crossfire, 1985 fuel pump, Steeroids R&P conversion
I agree that the factory service manual will be the best resource for this project followed by the assembly manual.  Ive adjusted my windows but never had to remove them and the service manual was fantastic help.


DOOR GLASS ADVENTURES?!

Posted: 3/20/08 2:07pm Message 6 of 6
Former Member
Send PM
Joined: 12/7/2003
Posts: 5
Vette(s): 81 frost beige - manual
ALL,
 
Thanx for the assistance.
 
Once I get this task taking care of I'll let ya know how "easy/difficult/fun" things turned out to be.
 
Jerry
 
P.S.
 
If there is anyone in the Hanford, CA area...................



in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)