Home page
SPONSOR AD SPONSOR AD

Topic: Engine Compartment Restoration

in Forum: C3 Body


Engine Compartment Restoration

Posted: 10/3/06 6:54am Message 1 of 5
Former Member
Send PM
Mechanicsville, VA - USA
Joined: 9/28/2006
Posts: 4
Vette(s): 1969 Black 427 Side Pipe Air Conditioned Convertible. 1969 Red 427 NCRS Top Flight Coupe. Used in the Corvette Museum 5 Generation Poster.
My 69 needs the smog pump cleaned up along with the 3 gold finish items; the wiper can, the vacuum valve on the drivers side and the master brake lid. Has anyone ever had good luck with just cleaning the smog pump or what gray paint do you recommend. The cadmium colored items need painted but I'm not sure the wiper can is the same color as the the brake lid and vacuum valve. Any help is appreciated.


SPONSOR AD:: (Our Sponsors help support C3VR)

Engine Compartment Restoration

Posted: 10/3/06 8:05am Message 2 of 5
Former Member
Send PM
East Hanover, NJ - USA
Joined: 9/25/2004
Posts: 525
Vette(s): '68 Black Conv. Matching 327/300 4 Spd. P/S, P/B, P/W, Tele, A/C
Fun,
 
The Smog Pump is usually natural aluminum, bot the end plate is painted semi-gloss black.  You should be able to cklean it up with a soft brass wire wheel attached to a drill.
 
As for the gold items, Eastwood (www.eastwoodco.com) makes a spray kit with a gold base coat w/ reg & green highlights.  They come out nice & clean looking but the finish does not match the original plating.
 
There should be a shop near you that can re-plate the parts if you disassemble them.  However, the correct parts are avaialble through most major parts houses with the correct finish.
 
Anthony



Engine Compartment Restoration

Posted: 10/3/06 5:21pm Message 3 of 5
Former Member
Send PM
Mechanicsville, VA - USA
Joined: 9/28/2006
Posts: 4
Vette(s): 1969 Black 427 Side Pipe Air Conditioned Convertible. 1969 Red 427 NCRS Top Flight Coupe. Used in the Corvette Museum 5 Generation Poster.
Thanks for the reply Anthony. ZIP Corvette is here in town and I may replace them with new and I will look into replating the wiper can. With an NCRS car I need to maintain the original look and original part if it is numbered. Bob


Engine Compartment Restoration

Posted: 10/4/06 3:26pm Message 4 of 5
Former Member
Send PM
East Hanover, NJ - USA
Joined: 9/25/2004
Posts: 525
Vette(s): '68 Black Conv. Matching 327/300 4 Spd. P/S, P/B, P/W, Tele, A/C
Bob,
 
The wiper can has the date ink stamped on the side.  It looks like the ink & pad rubber stamps used in an office. 
 
From what I've seen, it can easily be recreated.  I'm sure that someone in the NCRS community can point you in the right direction.
 
Good luck,
 
Anthony



Engine Compartment Restoration

Posted: 10/4/06 3:58pm Message 5 of 5
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Bob Demmel can restore the headlight actuators, and the wiper actuators, with the correct plating, and ink stamps!

rjdemmel@comcast.net

He just happens to be a friend of mine, as well as a NCRS judge.


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)