Home page
SPONSOR AD SPONSOR AD

Topic: Front and Rear Bumper Replacement

in Forum: C3 Body


Front and Rear Bumper Replacement

Posted: 3/26/07 11:38am Message 1 of 3
Former Member
Send PM
Rhineland, MO - USA
Joined: 4/11/2006
Posts: 108
Vette(s): Picked it up and it running good now. Just need to do a few more things and she will be 100 percent.
Now the car is bumperless. I took off the front and rear bumpers so I can replace them. The back one was so brittle it came off in small peices. The front one was not as brittle but ready to be replaced. I already have the True Flex replacements. Since I am this far into this project, I might as well get the rest of the painted. I want this to be a cruiser and not a garage queen.
 
What is the best way to bolt up the front bumper? There is not all that much room behind for a wrench. I have new mounting hardware and they are the ones that are about 1 1/4 inch long. The back looks like it could be fairly simple. Just need a long arm to get up that high from under the car. Any tips would be appreciated.
 



SPONSOR AD:: (Our Sponsors help support C3VR)

Front and Rear Bumper Replacement

Posted: 3/26/07 12:12pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Send PM
Greensburg, IN - USA
Joined: 9/24/2003
Posts: 5188
Vette(s): Previous: 1984 Silver / Charcoal Coupe, 1988 Maroon Coupe / 1989 Artic White Coupe / 2001 Speedway White Roadster / Present:1976 Stingray Black / Black, Auto, 350 slightly modified (355 hp) Luxor Wires Redline Tires. / 1989 Roadster Bright Red...
Try this LINK or type in the word BUMPER into the search link above on this page. Set the settings for POST TOPICS and posts 1 year or newer.This will let you see numerous post about our experiences in changing both front or rear, fiberglass, flexglass, OEM, etc. Good Luck.... we're here if ya need us...   


Front and Rear Bumper Replacement

Posted: 3/26/07 8:16pm Message 3 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
The rear cover is not that hard at all. The front, however is a bit tight. If you remove the front grills, and raise the headlights up, it's a little easier. Redwingvette is doing this right now...check his thread...
Your '75 will be a bit different, but the basics will be the same.Adams' Apple2007-03-26 20:18:13


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)