Home page
SPONSOR AD SPONSOR AD

Topic: front and rear bumpers

in Forum: C3 Body


front and rear bumpers

Posted: 7/30/03 4:19pm Message 1 of 3
Former Member
Send PM
Joined: 3/16/2003
Posts: 5
Vette(s): 1979 coupe
Hi Everyone...
Have Vette stripped and front and rear urethane (rubber) bumpers pretty cracked.. is there any way to repair these short of replacing them?
Thanks for any ideas.


SPONSOR AD:: (Our Sponsors help support C3VR)

front and rear bumpers

Posted: 8/2/03 6:21pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Send PM
Waterford, MI - USA
Joined: 9/13/2002
Posts: 1754
Vette(s): 1973 Red coupe
How bad are the cracks? Most of the time you will be better off replacing them. Cracks that have been patched tend to crack again.


Brian - NCM Lifetime Member

73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System

Dewitt radiator and dual electric fans
Borgeson Steering box
 


front and rear bumpers

Posted: 8/3/03 7:17pm Message 3 of 3
Former Member
Send PM
Syracuse, NY - USA
Joined: 8/1/2003
Posts: 693
Vette(s): ...
try rubbing brake fluid into them it softens rubber and makes small cracks disappear . try it on a small spot low first to see how it does on urethane. brake fluid works great on tires too. |wavey|


in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)