Home page
SPONSOR AD

Topic: hatchback conversion?

in Forum: C3 Body

SPONSOR AD:: (Our Sponsors help support C3VR)

hatchback conversion?

Posted: 7/3/08 3:29pm Message 22 of 26
Profile Pic
Lifetime MemberLifetime Member
Send PM
SHELBYVILLE, TN - USA
Joined: 7/5/2002
Posts: 3942
Vette(s): 1976 L48 auto

1978 L82 4speed

1994 LT1 6speed
Interesting that there is another 78 out there with a hatch.... still, best i could figure is that someone put an 82 CE rear clip on it, seemed to be a show car at one time, chrome half shafts, chrome rear spring, chromed intake/carb/headers.. think it had a chrome alternator and water pump at one time...  someone at one time put some effort into it, oh,  it was also pinstripped and on the rear bumper was Corvette Specialties... if that means anything to anyone out there.. :) 


StingrayJim
NCM Lifetime Member #1936

Stingray's '76���������������������������� StingrayJr's '78���������������������������Lil Red '94

(click each one to see a bigger version)

hatchback conversion?

Posted: 7/3/08 4:55pm Message 23 of 26
Former Member
Send PM
Joined: 6/30/2008
Posts: 12
hey... i just noticed you are from shelbyville... i live in la vergne.


hatchback conversion?

Posted: 7/4/08 10:39am Message 24 of 26
Lifetime MemberLifetime Member
Send PM
Joined: 7/24/2003
Posts: 2150
Vette(s): 1982 Collector Edition #3413
[QUOTE=squirts1]how can the hinges be worth so much? you would think a machine shop could fab something up much cheaper than that.
 
 
These hinges are not made by anyone else except this person.   Hinges are discontinued and/or where not made for the public. Shocked  
 
Note:  These hinges are 100% correctly made repos by this person from a cad drawing of another original hinge.   Thumbs%20Up
Iron822008-07-04 10:39:48


hatchback conversion?

Posted: 7/4/08 9:18pm Message 25 of 26
Former Member
Send PM
Loveland, CO - USA
Joined: 9/30/2007
Posts: 28
Vette(s): Red 1980 L48 TH350 Automatic, Edelbrock Performer Intake, Hooker Headers Sidepipes. Doeskin Cloth Interior, Collector's Edition Lifting Rear Hatch.

I purchased my '80 a couple of years ago and someone had converted the hatchback to lifting by using the Collector's edition hardware. The installation could have been tighter. The rear deck was jigsawed where using a router would have been cleaner. I just replaced the struts and am in the process of fabricating a custom sound install. It's very helpful to have the hatch open to work in that area, and will be great for showing it off when I'm finished! So, it can be done, I just wasn't the one who did it.

   wdwrkr4



hatchback conversion?

Posted: 7/5/08 10:01am Message 26 of 26
Former Member
Send PM
Mounds View, MN - USA
Joined: 5/24/2007
Posts: 1031
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
[QUOTE=stingrayjim] and on the rear bumper was Corvette Specialties... if that means anything to anyone out there.. :)  [/QUOTE]

That must be a very special and wonderful car!Wink

Larry



in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)