Topic: HEADLIGHT COVER
in Forum: C3 Body
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
Canada
Joined: 3/9/2008
Posts: 164
Vette(s): 70 VETTE 350/300HP, AUTOMATIC, ALL STOCK EXCEPT FOR MILD CAM,LAGUNA GREY, 3:55 POSI GEARS
ONE OF MY HEADLIGHT COVERS DROPS A LITTLE LOWER AND DOES NOT STAY FLUSH TO THE FRONT NOSE. IS THERE A ADJUSTEMENT TO BBING IT UP A TOUCH. WHEN I SHUT THE LIGHTS OFF ITS FINE, AFTER DRIVING AROUND A BIT WITH THE LIGHTS OFF IT DROPS A BIT.ANY IDEAS. 
SPONSOR AD:: (Our Sponsors help support C3VR)
Sounds like a slow vacuum leak to me, possibly the actuator, losing a little vacuum and allowing the door to lower a tad. Operation of the actual lights (on and off) would not have anything to do with the loor lowering a little.
6880Mike 2008-04-25 06:57:37
Former Member
Send PM
Mounds View, MN - USA
Joined: 5/24/2007
Posts: 1031
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
Both the up and down motion have mechanical stops. The down is controlled by a screw that goes down through the rear link, and is adjusted from below with a 5/16 wrench.
Larry
Larry
in Forum: C3 Body
SPONSOR AD: (Our Sponsors help support C3VR)