Home page
SPONSOR AD

Topic: How to remove windshield washer bottle

in Forum: C3 Body

How to remove windshield washer bottle

Posted: 6/1/17 9:40am Message 1 of 3
Profile Pic
Standard Member
Send PM
Cana, VA - USA
Joined: 7/3/2016
Posts: 372
Vette(s): 1975 Stingray 71 350 engine Flat top pistons Sniper fuel injection Hyperspark ignition Vintage Air air conditioning Borgeson power steering box
Now that I've fixed almost everything in my 75 coupe, it's down to the little stuff.

The windshield washer pump does not work, but I don't see how to remove the bottle without removing the brake booster or ??

Any ideas on the best way to get to the washer pump?




   

SPONSOR AD:: (Our Sponsors help support C3VR)

Re: How to remove windshield washer bottle

Posted: 6/4/17 11:31am Message 2 of 3
Lifetime MemberLifetime Member
Send PM
Belvidere, IL - USA
Joined: 10/24/2004
Posts: 438
Vette(s): 1977 Black T-Top ZZ4 5Sp 16in Wheels
You can come up from the bottom. Remove the rocker, 4 bolts hold splash guard on. Check it out.


Re: How to remove windshield washer bottle

Posted: 6/4/17 12:23pm Message 3 of 3
Profile Pic
Former Member
Send PM
Gig Harbor, WA - USA
Joined: 10/2/2014
Posts: 405
Vette(s): 1973 L82 4 Speed Coupe - Very original, well documented driver/survivor. 2016 Bend Regional NCRS Top Flight.
Bill, +1 on up from the bottom. I thought it was two bolts that hold the lower shield but I could be wrong. Removed both of mine for cleaning etc. last year. I was actually able to loosen the front two screws of the rocker panel and carefully pry it back to get at the bolts. If you can, no need to completely remove the rocker, the middle three or four screws are usually rusted in and can turn into another can of worms. Good luck !!


John Sigmund
valkman57@sbcglobal.net
NCRS Member 61302
NW NCRS Chapter Member



Duct tape is the new Black !!

in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)