Hello Everyone, hope all are being safe. I'm having a problem with my headlights. The driver side headlight works fine, up & down. The passenger side does not work at all. I've switched all the hoses from the driver side to the passenger side on the vacuum actuator relays. After switching each hose, I pulled the interior light switch and each time the drivers side opens & closes. After switching all hoses, still the driver side opens & closes. Each time the passenger side never opens. So, after doing all that, does anyone know if it might be the vacuum actuator relay or the actuator? After fixing headlights, I need to get my wipers working. Any help is appreciated. Thank you,
alex
Check your e-mail. I sent you some good troubleshooting info. Sounds like you have vac lines not properly connected somewhere, or the actuator itself is leaking.
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
I am having the same problem, same side.
Any help would be great.
Thanks
Dan
I am having the same problem, same side.
Any help would be great.
Thanks
Dan
I'll e-mail you the same info. 👍 If you guys get yours fixed please post what it was so others will know.
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
One of the headlights on my sons 78 “broke “ last night while he was driving home. Now it doesn’t open or close. It is sitting just a little above where it should when closed. I know this isn’t much information but I haven’t had a chance to go look at it. Any thought on what might have broken or where to start looking? Thanks for any help anyone can give.