Home page
SPONSOR AD SPONSOR AD

Topic: Top winsheld molding replacement

in Forum: C3 Body


Top winsheld molding replacement

Posted: 1/15/07 12:23pm Message 1 of 7
Former Member
Send PM
Fresno, TX - USA
Joined: 1/15/2007
Posts: 240
Vette(s): 1980 corvette
At the top where the T tops and Top windshield joins is rusted out. What can I do to fix or replace it. Can it be fixed? please help, this is my first vette just got it today and trying to restore it.  Thanks


  
SPONSOR AD:: (Our Sponsors help support C3VR)

Top winsheld molding replacement

Posted: 1/15/07 7:44pm Message 2 of 7
Lifetime MemberLifetime Member
Send PM
Lanoka Harbor, NJ - USA
Joined: 12/21/2006
Posts: 828
Vette(s): 1975 metallic blue coupe with t-tops,L48, t/t steering, black leather interior. 1990 L98, white/red leather interior, auto,a/c
it sounds as if you are talking about the windshield frame. you can get all the separate pieces foe replacement. i know ecklers has the parts. go to ecklers.com and type in year of car and all the different categories are there. good luck


LIFETIME MEMBER #97
THE DYNAMIC DUO


Top winsheld molding replacement

Posted: 1/15/07 8:43pm Message 3 of 7
Lifetime MemberLifetime Member
Send PM
Irving, TX - USA
Joined: 8/21/2004
Posts: 4273
Vette(s): #1 -1969 Corvette Coupe Riverside Gold, black interior,MN,A/C,350/350,PS,PB,window cranks. #2 -2000 C5, black/black, 6 sp, Bose system & lots of buttons.

Does it have any rust down the metal/chrome sides of the window?  You might have to take off the interior trim and look underneath to check that out too.




�����
My Link


MICK - C3VR Lifetime Member #113

Top winsheld molding replacement

Posted: 3/15/07 6:19am Message 4 of 7
Former Member
Send PM
Fresno, TX - USA
Joined: 1/15/2007
Posts: 240
Vette(s): 1980 corvette
well guys Im proud to say it was a sucess. Now I can help someone else that has the same problem, I have experience! I cut out the whole windshield frame and welded another one in frstvette2007-03-15 06:30:50


  

Top winsheld molding replacement

Posted: 3/15/07 6:33am Message 5 of 7
Profile Pic
Lifetime MemberLifetime Member
Send PM
HOWELL, NJ - USA
Joined: 5/18/2004
Posts: 6812
Vette(s): 1979, Targa Blue (72 Color), Pace Car rear spoiler, L88 hood, Dark blue factory interior, 525HP 406, HD 700R4, 370 gears,Steeroids, composite rear spring, TT IIs wrapped in T/A Radials.
That's how to dot it. Thumbs%20Up
 
Another typical area that goes bad is down at the bottom pf the windshield posts wherethe top corner of the fenders are. You'll know it's rotted through if you're carpet is getting wet next to the kick panels when you wash it or it rains.Dead This one is a pain to fix....



LukesVette Homepage
Veteran of Operation Iraqi Freedom
101st Airborne(AirAssault!)
God Bless America

Support Our Troops


     

Top winsheld molding replacement

Posted: 3/23/07 6:12am Message 6 of 7
Former Member
Send PM
Fresno, TX - USA
Joined: 1/15/2007
Posts: 240
Vette(s): 1980 corvette
I checked the post and can see no sighs of rust. Can I trust my eye sight? What makes it all rust there should be no standing water. I can under the T top upper frame, because it can hold water but not the left and right pillar or windshield post water runs off.


  

Top winsheld molding replacement

Posted: 3/23/07 1:40pm Message 7 of 7
Lifetime MemberLifetime Member
Send PM
North Charleston, SC - USA
Joined: 3/20/2004
Posts: 4176
Vette(s): 1975 L48 AT AC T-top
If you pull the A-pillar interior trim pieces and the downtubes are sloid you are probably okay. If the downtubes are rusty and soft near the dash pad then that spells trouble. But it is better to find it now versus later.
Scorr



in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)