Home page
SPONSOR AD

Topic: water into car -testing

in Forum: C3 Body

water into car -testing

Posted: 6/5/08 12:23pm Message 11 of 13
Standard Member
Send PM
United Kingdom
Joined: 5/18/2008
Posts: 51
Vette(s): 1979 C3 L82 corvette
strange,
can anyone else help with this. are these red plastic capped holes in the sill top area supposed to be drain paths or do they have some other purpose.
 
thanks.
 
brian



SPONSOR AD:: (Our Sponsors help support C3VR)

water into car -testing

Posted: 6/6/08 7:09am Message 12 of 13
Former Member
Send PM
Horse Cave, KY - USA
Joined: 10/22/2007
Posts: 488
Vette(s): 1968 convertible; 1980 L-82
[QUOTE=redborderreivers]...red plastic bungs/plugs in the sill. top 
when i take these out i can see through the sill to the ground. ae these drain holes? has the previous owner put thes plugs in, should they be in?...[/QUOTE]
 
They are stock, but not drains.  They could have been used for guide pins at body drop.  After the body was on the frame, the caps were put in the holes.  They might also have been used to hold the sills in the jig while the birdcage was being welded up.  There are a couple of other plugged holes in the birdcage on each side at the base of the windshield which were jig fixtures.  You can't see these with the doghouse in place.
 
Smile



water into car -testing

Posted: 6/6/08 10:36pm Message 13 of 13
Standard Member
Send PM
United Kingdom
Joined: 5/18/2008
Posts: 51
Vette(s): 1979 C3 L82 corvette
thanks for that,
makes sense, ill put them back in once ive finished the bodywork.Thumbs%20Up



in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)