Home page
SPONSOR AD SPONSOR AD

Topic: Wiper Arm Spray Nozzles

in Forum: C3 Body


Wiper Arm Spray Nozzles

Posted: 8/10/04 10:57am Message 1 of 3
Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe Anything, but Stock and more mods to come! SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.
I'm not sure if I should put this here, but seems most likely since the arms attach to the body.

Maybe they should start a forum just for headlights and wiper system. Anyway to the point at Hand.

Can someone email me or post pictures of the wiper spray nozzles on their 72 Vette. I'm reworking this area and they brass tube on one side is all out of wack and I can't figure out the routing location for the tubes. Some of the clips were broke and the last ower must have used a |hammer| to fix it rather then fixing it the right way.

I'm particularly interested in the Passenger side. Photos of each mounting clip location and how it exits at the wiper blade would be idea. The metal half moon clip at the wiper blade end faces outward while the driverside faces inward. That seems totolly wrong|headscratch|. Funny thing is the rivet holding the metal clip is all original.

Any help would be helpful.

My email is mattheld@holley.com


SPONSOR AD:: (Our Sponsors help support C3VR)

Wiper Arm Spray Nozzles

Posted: 8/10/04 7:34pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Send PM
Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
would photos of a 69 help ?


Wiper Arm Spray Nozzles

Posted: 8/11/04 9:15am Message 3 of 3
Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe Anything, but Stock and more mods to come! SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.
They have a picture of them on the Corvette Central website, but they are identical. I don't believe that is correct as the left and rights will differ. According to them 69-74 are all the same. So yes photos off your 69 would be great.

Thanks!


in Forum: C3 Body


SPONSOR AD: (Our Sponsors help support C3VR)