Topic: Wipers out of Sync
in Forum: C3 Body
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
If you look in THIS area of the cowl, you will see where the wiper adjustments are. On the lever that come off of the wiper motor, there are the two linkages that work the two wiper arms. On the linkages, you'll see two small nuts/studs. Loosen the nuts, and move the linkage just a little at a time(they are slotted to allow for adjustments), until the wipers no longer hit, and they do not go too far up, or down.
Also, make sure you have the correct length wiper blades on the car, first...if they are too long, you'll have this problem.
Also, make sure you have the correct length wiper blades on the car, first...if they are too long, you'll have this problem.

Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Body
SPONSOR AD: (Our Sponsors help support C3VR)