Home page
SPONSOR AD SPONSOR AD

Topic: aiming help

in Forum: C3 Cooling and Heating Systems


aiming help

Posted: 2/3/09 4:27pm Message 1 of 2
Profile Pic
Lifetime MemberLifetime Member
Send PM
BILOXI, MS - USA
Joined: 12/8/2001
Posts: 547
Vette(s): 1969 rag top
I have a vacuum problem (interior controls) have checked the actuators and they all work(defrost-heat- vent)all but the vent will work from the control switch lines. MY question is does anyone have a great layout of the interior vacuum routing (the aim  shows the stripe colors page 158 but after 40 years the colors are all black and the line going to the vent seems to connect to a distribution point above the heater <please don't tell me i need to pull the heater to follow the lines>. anyway i can locate the heater control line,the defrost  control line that only leaves two lines if anyone hase a picture of the vacuum lines on the switch and can tell me whitch one is the input and which is the actual live vacuum line it will save a whole heap of time and vocabulary, and oh yes what to hell do all the connections on the distribution point go to???


Annicorvette
Lifetime member # 35

SPONSOR AD:: (Our Sponsors help support C3VR)

aiming help

Posted: 2/3/09 9:01pm Message 2 of 2
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
I think the factory service manual has a great diagram of the vac lines, and routing...Mike(mkapp7879) posted one a while back...I think...


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

in Forum: C3 Cooling and Heating Systems


SPONSOR AD: (Our Sponsors help support C3VR)