Topic: Electric fans - need help
in Forum: C3 Cooling and Heating Systems
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Hi guys. I removed my pulley’s and installed a March Performance serpentine system. Love the serpentine but I had to use spacers to get my fan out away from my power steering pump. I am interested in removing the fan all together and was wondering if you guys could recommend an electric fan that would work in my car? (1968)
I measured the radiator and of course currently can’t recall – I think it is 32 inches. But there is some supports that come within 2 inches of the radiators at each side. So that fan would probably need to be a few inches shorter to fit. I will measure it all accurately this evening. Any advice?
SPONSOR AD:: (Our Sponsors help support C3VR)
I called Summit and spoke with them and went with this fan : http://www.summitracing.com/parts/BCI-75007/
The thermo control was another $68 and the brackets were another $100 .... ugh !
This fan is 23.5" wide, my radiator is 32" end to end and the core is 27". but I had to drop 2" off because of the supports in the car. I think that 23.5 inches should be more than sufficient coverage to cool the water.
Once I finish installing it I can / will post a picture.
in Forum: C3 Cooling and Heating Systems
SPONSOR AD: (Our Sponsors help support C3VR)