Topic: B&M converter controller for my OD auto trans
in Forum: C3 Driveline Components
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
I just installed a B&M contorller. I got mine fromEbay for $160 after using a 10% off coupon.
Redwingvette 2008-07-03 05:35:04
It works real good with my setup, BTO Trans install. I have it set to lock the converter when I hit 43mph and it disengages when I slow down to 40mph. I use to have to either downshift or turn off the lock-up converter if I slowed down and tried to speed back up again. If I didn't, the motor would chug or ping until the trans downshifted or I got the speed back up to above 40mph.
It is a little pricey but I think it was worth it.
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Dewitt radiator and dual electric fans
Borgeson Steering box

SPONSOR AD:: (Our Sponsors help support C3VR)
The nice thing about this setup is you can adjust it to what your needs are by a turn of th dial. It operates off a sensor that attaches to the speedo cable without any mods.
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Dewitt radiator and dual electric fans
Borgeson Steering box

in Forum: C3 Driveline Components
SPONSOR AD: (Our Sponsors help support C3VR)