Home page
SPONSOR AD SPONSOR AD

Topic: Name that noise

in Forum: C3 Driveline Components


Name that noise

Posted: 4/23/08 7:32am Message 1 of 13
Former Member
Send PM
Kendall Park, NJ - USA
Joined: 3/9/2005
Posts: 789
Vette(s): 1981 - 59 Beige over Cinnebar leather. Edlebrock top end, 2200 stall w/shift kit, 3:55s, Mufflex maniback exhaust, nice stereo, 16 in AREs w/BFGs
I have a whining coming from the right (passenger side) rear of the car. It seems to go away under acceloration and whines more during coasting or feathering of the throtle. It hasn't gotten worse in 4 years nor has it gotten better. The entire rear end from the lugs to the pumpkin were rebuilt as was the brakes and suspension..  Thoughts? 


SPONSOR AD:: (Our Sponsors help support C3VR)

Name that noise

Posted: 4/23/08 8:27am Message 2 of 13
Profile Pic
Lifetime MemberLifetime Member
Send PM
Joined: 7/2/2006
Posts: 8205
It sounds like you have a problem with the ring and pinion clearances. I had one many years ago that sounded like a siren behind me. Maybe Joel will give some more ideas on the whine. 


corvette440hp

Name that noise

Posted: 4/23/08 9:13am Message 3 of 13
Former Member
Send PM
Kendall Park, NJ - USA
Joined: 3/9/2005
Posts: 789
Vette(s): 1981 - 59 Beige over Cinnebar leather. Edlebrock top end, 2200 stall w/shift kit, 3:55s, Mufflex maniback exhaust, nice stereo, 16 in AREs w/BFGs
Thats what I thought but I had the noise before the diff was rebuilt too 


Name that noise

Posted: 4/23/08 9:35am Message 4 of 13
Profile Pic
Lifetime MemberLifetime Member
Send PM
Summerville, SC - USA
Joined: 8/31/2005
Posts: 660
Vette(s): My 1974 Vette sold last August 2014. I am still willing to show up to events and local gatherings if anything happening No new vette yet.
what about the universal joints on the drive shafts?  you do have 3 drive shafts.
 
Jeremy H.
Movie Collector2008-04-23 09:36:30


Name that noise

Posted: 4/23/08 10:16am Message 5 of 13
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20219
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Kevin, the wheel/trailing arm bearings are prolly failing...they will whine when they get dry, and start galling. Eventually, the whine will turn into a grind...
Did they do the t-arm bearings too?
A whine/noise under accell, or decell, is usually contributed to gear noise in the diff. If the diff was rebuilt, the noise should have at least changed, if it was in fact a diff noise.

It could also be a tire noise...ya never know.
Try moving the tires around, and see if the noise follows...


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Name that noise

Posted: 4/23/08 11:03am Message 6 of 13
Former Member
Send PM
Kendall Park, NJ - USA
Joined: 3/9/2005
Posts: 789
Vette(s): 1981 - 59 Beige over Cinnebar leather. Edlebrock top end, 2200 stall w/shift kit, 3:55s, Mufflex maniback exhaust, nice stereo, 16 in AREs w/BFGs
The tires are new, had the noise w/the old tires. The U joints are all new. The noise I think did change when the diff was done.   WHen the diff was done they siad the t-arms/bearings were ok. 
 
BTW - is there any maint to be done on the rear bearings? 



Name that noise

Posted: 4/23/08 6:19pm Message 7 of 13
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20219
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
No maintenance on the bearing assys...just replacement when they take a dump.
IF the noise is definitely coming from the pass side...it pretty much would have to be a t-arm bearing....
I'd have someone check it out for looseness...there should be no movement of the wheel...


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Name that noise

Posted: 4/24/08 6:45am Message 8 of 13
Former Member
Send PM
Kendall Park, NJ - USA
Joined: 3/9/2005
Posts: 789
Vette(s): 1981 - 59 Beige over Cinnebar leather. Edlebrock top end, 2200 stall w/shift kit, 3:55s, Mufflex maniback exhaust, nice stereo, 16 in AREs w/BFGs
Adam - I had her up on a lift last night. The t-arms and bearings are all ok. We went thru w/a fine tooth comb. After talking with Frank and Jim (My wrenches) they told me they did a few rear-rebuilds on 80-82s. I went first and others followed w/the 3:55's...  They had 2 diff shops do the carrier rebuilds (all a-1 top shelf guys). It seems the 3:55s from this one vendor just seem to be a little whiney. Everything is to spec and lubed. It's one of those make the radio or the exhaust louder sorta things....  All is ok..    


Name that noise

Posted: 4/24/08 7:15am Message 9 of 13
Profile Pic
Lifetime MemberLifetime Member
Send PM
Rockland, MA - USA
Joined: 1/30/2003
Posts: 584
Vette(s): 76, L48, 4spd & 09, LS3, 6spd
I would get another opinion and find out what the fix truly is - other than turning up the radio.
 
Good Luck - Thumbs%20Up



 

 

Name that noise

Posted: 4/24/08 7:19am Message 10 of 13
Profile Pic
Lifetime MemberLifetime Member
Send PM
Joined: 7/2/2006
Posts: 8205
That's the gears "singing a song." From what you originally described I really thought that it had to be the gears. I'm wondering if they were set up properly.


corvette440hp

in Forum: C3 Driveline Components


SPONSOR AD: (Our Sponsors help support C3VR)