Topic: REAR END QUESTIONS
in Forum: C3 Driveline Components
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Standard Member
Send PM
macedon, NY - USA
Joined: 7/20/2006
Posts: 367
Vette(s): 68 COUPE 454
HAS MOTION HOOD SCOOP, REVERSED GILLS
ZL-1 FENDER FLARES AND
MOTION REAR SPOILER, LEMAN'S GAS CAP,
BUCKET HEADLIGHTS.
CAN-AM FRONT
RACING SPOILER. CHROME HOOKER HEADERS AND SIDE PIPES! 4 SPEED M20,
LOOKS FAST STANDING STILL !!
hi all, i have 2 questions about the rear end i bought for my car.
1st:
the ID on the pumpkin is: AWW 168 E2
does anybody know what this is?
( when i bought it i was told it was a 3:08 POSI.
this came off a 74 but may not have been original.
2nd:
one of the side yokes comes out.
the other one seems to be retained.
i see no groove for a retaining ring on the end of the yoke spline.
anyone got any answer about this?
thanks
joe
1st:
the ID on the pumpkin is: AWW 168 E2
does anybody know what this is?
( when i bought it i was told it was a 3:08 POSI.
this came off a 74 but may not have been original.
2nd:
one of the side yokes comes out.
the other one seems to be retained.
i see no groove for a retaining ring on the end of the yoke spline.
anyone got any answer about this?
thanks
joe
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20219
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
AW = 3.08 ratio(posi)
W = Warner Gear
168 = Julian date of the year[168th day of the year, or June 17th](casting date will tell the year)
E= Eaton Posi unit
2 = assy shift #
If the yoke comes out of the diff, and you see no snap-ring groove on the end, the yoke is no good. It has worn down so far that the snap-ring has fallen off inside the diff. The yoke, and possibly the center pin of the diff will need to be replaced.
Check out these pics for info on de-coding the diff, and a look at good yokes...
Click for linkAdams' Apple 2008-03-05 21:11:44
W = Warner Gear
168 = Julian date of the year[168th day of the year, or June 17th](casting date will tell the year)
E= Eaton Posi unit
2 = assy shift #
If the yoke comes out of the diff, and you see no snap-ring groove on the end, the yoke is no good. It has worn down so far that the snap-ring has fallen off inside the diff. The yoke, and possibly the center pin of the diff will need to be replaced.

Check out these pics for info on de-coding the diff, and a look at good yokes...

Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Standard Member
Send PM
macedon, NY - USA
Joined: 7/20/2006
Posts: 367
Vette(s): 68 COUPE 454
HAS MOTION HOOD SCOOP, REVERSED GILLS
ZL-1 FENDER FLARES AND
MOTION REAR SPOILER, LEMAN'S GAS CAP,
BUCKET HEADLIGHTS.
CAN-AM FRONT
RACING SPOILER. CHROME HOOKER HEADERS AND SIDE PIPES! 4 SPEED M20,
LOOKS FAST STANDING STILL !!
ahhh man, i was hoping it woundn't need rebuilding.
but i had a feeling , in fact a bought a gasket for the rear end. my gut told me that was not right.
well, i should have asked the question sooner, as you can see by the attached pic i just put it on the frame !
well , off it comes !

thanks for the info on identifying it . at least that part was good !
i'll probably be asking for some help when i pull it apart.
joe
68vet427 2008-03-02 19:35:41
but i had a feeling , in fact a bought a gasket for the rear end. my gut told me that was not right.
well, i should have asked the question sooner, as you can see by the attached pic i just put it on the frame !
well , off it comes !

thanks for the info on identifying it . at least that part was good !
i'll probably be asking for some help when i pull it apart.
joe
in Forum: C3 Driveline Components
SPONSOR AD: (Our Sponsors help support C3VR)