My right turn signal stopped flashing so I replaced the relay so I could get turn signal to work. I also replaced the socket for that bulb. But now the flashing only work if I apply a lot of pressure to bulb. Once I let off the pressure the bulb stop flashing. I replaced the socket with factory socket for that car. I would appreciate any help I can get.
Thanks
Try replacing the bulb with a known good one.
Did the problem develop before or after the replacement of the socket with a new one?
1973 L-82 4 spd
Make sure you have the bulb properly oriented into the socket. You can get an 1157 in the wrong way.
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
The problem started when I replaced bulb. I replace with brand new auto zone bulb. If there is another brand bulb I should use let me know. I really appreciate the help!
I tried both ways. I guess it is a spring at the bottom of socket. Seems like the bulb is not engaging like it should? I bought two sockets and they both do the same thing. When I put pressure on the bulb...it works fine. When I release it or try to install back into taillight it stops working. Please help!
I recommend trying a better quality bulb for starters.
I'll try another bulb. Thanks!
check the contact in the socket