Topic: 73 ammeter inop
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
short of dropping the dash to check the ammeter gauge itself, are there any tests that i can perform to make sure the wiring is correct?
Ammeter has never worked since I've had the car. Alternator has been replaced coincidently and charging circuit appears to work fine.
Has anyone ever measured the voltages at the 2-pin plug on the alternator?
What should it read in a working system?
Any help would be appreciated.

Ammeter has never worked since I've had the car. Alternator has been replaced coincidently and charging circuit appears to work fine.
Has anyone ever measured the voltages at the 2-pin plug on the alternator?
What should it read in a working system?
Any help would be appreciated.


techelec
SPONSOR AD:: (Our Sponsors help support C3VR)
Former Member
Send PM
mongaup valley, NY - USA
Joined: 8/25/2003
Posts: 79
Vette(s): 1958 red-white 4 speed 283
1976 My project car L48 T350
1984 Daily driver
1986 convertable daily driver
1991 zr1 never been driven still in plastic
go to the junk and clip of one of the 2 prong harness and splice it into your car. those terminals get screwed up you might even be able to just clean them. and did you check so if the gauge is even connected?
RJG
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)